Eugenio Dentoni Litta

Eugenio Dentoni Litta

Auto-generated profile, based on publicly available information

Eugenio Dentoni Litta

IMEC, Leuven, Belgium

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2017
Verified
Conference Paper
Closed access
HMH. Mertens
H. Mertens
RRR. Ritzenthaler
R. Ritzenthaler
VPV. Pena
V. Pena
GSG. Santoro
G. Santoro
KKK. Kenis
K. Kenis
NHN. Horiguchi
N. Horiguchi
We report on CMOS-integrated vertically stacked gate-all-around (GAA) Si nanowire (NW) MOSFETs with in-situ doped source-drain stressors and dual work function metal gates. We demonstrate that oxidation-induced SiGe/Si fin deformation by STI densification is effectively suppressed by a SiN liner. This SiN fin protection improves the controllability of nanowire formation. In addition, highly-selective Si nano-wire release and inner spacer cavity formation without Si re-flow are demonstrated. Finally, for the first time we report functional ring oscillators based on stacked Si NW-FETs.

2 July 2015 in Nanoscale
Verified
Journal Article
Open access
PDF file
SVSam Vaziri
Sam Vaziri
MBM. Belete
M. Belete
ELE. Dentoni Litta
E. Dentoni Litta
ASA. D. Smith
A. D. Smith
GLG. Lupina
G. Lupina
MÖM. Östling
M. Östling
Vertical graphene-based device concepts that rely on quantum mechanical tunneling are intensely being discussed in the literature for applications in electronics and optoelectronics. In this work, the carrier transport mechanisms in semiconductor–insulator–graphene (SIG) capacitors are investigated with respect to their suitability as electron emitters in vertical graphene base transistors (GBTs). Several dielectric materials as tunnel barriers are compared, including dielectric double layers. Using bilayer dielectrics, we experimentally demonstrate significant improvements in the electron injection current by promoting Fowler–Nordheim tunneling (FNT) and step tunneling (ST) while suppressing defect mediated carrier transport. High injected tunneling current densities approaching 103 A cm−2 (limited by series resistance), and excellent current–voltage nonlinearity and asymmetry are achieved using a 1 nm thick high quality dielectric, thulium silicate (TmSiO), as the first insulator layer, and titanium dioxide (TiO2) as a high electron affinity second layer insulator. We also confirm the feasibility and effectiveness of our approach in a full GBT structure which shows dramatic improvement in the collector on-state current density with respect to the previously reported GBTs. The device design and the fabrication scheme have been selected with future CMOS process compatibility in mind. This work proposes a bilayer tunnel barrier approach as a promising candidate to be used in high performance vertical graphene-based tunneling devices.

11 October 2018 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
ECE. Capogreco
E. Capogreco
LWL. Witters
L. Witters
HAH. Arimura
H. Arimura
FSF. Sebaai
F. Sebaai
CPC. Porret
C. Porret
NCN. Collaert
N. Collaert
This paper reports on 45-nm fin pitch strained p-type Ge gate-all-around devices fabricated on 300-mm SiGe strain-relaxed-buffers (SRB). By improving the process integration flow, excellent electrical performance is demonstrated: the $Q$ factor is increased to 25 as compared to our previous work, $I_{ \mathrm{\scriptscriptstyle ON}} = \textsf {500}~\mu \text{A}/ \mu \text{m}$ at $I_{ \mathrm{\scriptscriptstyle OFF}} = \textsf {100}$ nA/ $\mu \text{m}$ is achieved, approaching the best published results on Ge finFETs. Good negative-bias temperature instability reliability is also maintained, thanks to the use of Si-cap passivation. The process flow developed for the fabrication of the single Ge nanowire (NW) is adapted and vertically stacked strained Ge NWs featuring 8-nm channel diameter are successfully demonstrated. A systematic analysis of the strain evolution is conducted on both single and double Ge NWs after the most challenging steps of the process integration flow: 1.7-GPa uniaxial-stress is demonstrated along the Ge wire, which originates from the lattice mismatch between the Ge source/drain and the Si 0.3 Ge 0.7 SRB.

16 November 2020 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
AGAnshul Gupta
Anshul Gupta
OPOlalla Varela Pedreira
Olalla Varela Pedreira
GAGoutham Arutchelvan
Goutham Arutchelvan
HZHouman Zahedmanesh
Houman Zahedmanesh
KDKatia Devriendt
Katia Devriendt
NHNaoto Horiguchi
Naoto Horiguchi
Buried power rail (BPR) is a key scaling booster for CMOS extension beyond the 5-nm node. This work demonstrates, for the first time, the integration of tungsten (W) BPR lines with Si finFETs. BPR technology requires insertion of metal in the front-end-of-line (FEOL) stack. This poses risks of stack deformation and device degradation due to metal-induced stress and contamination. To assess the stack deformation, we demonstrate W-BPR lines which can withstand source/drain activation anneal at 1000 °C, 1.5 s, without adversely impacting the stack morphology. To address the contamination risk, we demonstrate a BPR process module with controlled W recess and void-free dielectric plug formation which keeps the W-line fully encapsulated during downstream FEOL processing. Suitable choice of BPR metal such as W with high melting point which does not diffuse into dielectrics also minimizes the risk of contamination. To assess the device degradation, simulations are carried out showing negligible stress transfer from BPR to the channel. This is experimentally validated when no systematic difference in the dc characteristics of CMOS without BPR versus those in close proximity to floating W-BPR lines is observed. Additionally, the resistance of the recessed W-BPR line is measured $\sim 120~\Omega /\mu \text{m}$ for critical dimension (CD) ~32 nm and height ~122 nm. The recessed W-BPR interface with Ru 3-nm TiN liner via contact can withstand more than 1000 h of electromigration (EM) stress at 6.6 MA/cm 2 and 330 °C, making Ru a candidate for via metallization to achieve low resistance contact strategy to BPR.

28 September 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
AVA. Veloso
A. Veloso
AJA. Jourdain
A. Jourdain
DRD. Radisic
D. Radisic
RCR. Chen
R. Chen
GAG. Arutchelvan
G. Arutchelvan
NHN. Horiguchi
N. Horiguchi
We report on scaled finFETs built with a novel routing scheme wherein devices are connected via buried power rails (BPRs) from both wafer sides, with tight variability and matching control. On the wafer’s frontside (FS), M1 lines (FSM1) are connected through V0 vias to M0A lines which are then linked to BPR lines by vias called VBPR while also contacting directly the device’s S/D-epi. As for gate wiring, to enable in this work its access from both wafer sides, gate is also connected to BPR via V0 landing on it and on a neighboring M0A line set only on field-oxide. A single-step metallization for M0A and VBPR is preceded by in situ preclean(s) optimized for improved BPR-VBPR contact interface and $\textit{R}_{\text{ext}}$ , as confirmed electrically and by physical analysis. After FS processing, wafer flipping, bonding, and extreme thinning, highly scaled, $\sim $ 323 nm deep nano-through-Si-vias (nTSVs) land on BPR, with tight overlay control and unchanged BPR resistance 26%–29% lower with improved tungsten (W)-fill, connecting them to the first backside (BS) metal level (BSM1). By moving the power delivery network to the BS (BSPDN), besides alleviating FS routing congestion, considerably smaller dynamic and static IR drop values are predicted from on-chip power heat maps generated for a low power 64-bit CPU at 2-nm design rules: 82% and 96% less worst-case values versus a reference configuration, respectively. P/NMOS show similar or even superior $\textit{I}_{\biosc{on}}$ – $\textit{I}_{\biosc{off}}$ after BS processing and extra anneal(s) added for $\textit{V}_{\textit{T}}$ recovery, mobility and bias temperature instability (BTI) improvement—up to 8%/15% higher $\textit{I}_{\biosc{on}}$ linked to anneal selection.

12 September 2013 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
PDF file
ELEugenio Dentoni Litta
Eugenio Dentoni Litta
PHPer-Erik Hellström
Per-Erik Hellström
CHChristoph Henkel
Christoph Henkel
SVSven Valerio
Sven Valerio
AHAnders Hallén
Anders Hallén
MÖMikael Östling
Mikael Östling
A novel process for atomic layer deposition of thulium oxide (Tm2O3) has been developed, employing TmCp3 as metal precursor and H2O as oxidizing agent. The use of a highly reactive organometallic precursor eliminates the need for a strong oxidizing agent (such as O3) and provides a high deposition rate of ∼1.5 Å/cycle. A thorough characterization of the process has been performed, identifying true ALD-type film growth in the temperature range 200–300°C. The ALD process has been further investigated by extensive physical and electrical characterization of the deposited films in terms of composition, crystalline phase, surface roughness and extraction of the dielectric constant. The films were found to be oxygen-rich Tm2O3, with low carbon impurity content at low deposition temperature and after annealing at 600°C. The developed process produced polycrystalline films, with a surface roughness <1 nm RMS. Integration in MOS capacitors demonstrated well-behaved CV curves after annealing at 600°C, with a relative dielectric constant of ∼16.