Pandian Balu

Pandian Balu

Auto-generated profile, based on publicly available information

Pandian Balu

Bharath Institute of Higher Education and Research, Chennai, Tamil Nadu, INDIA

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 January 2023 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
AHA. Harigaran
A. Harigaran
PBPandian Balu
Pandian Balu
The current experiment will look into the effect of adding an antioxidant (butylated hydroxytoluene) to palm oil biodiesel (20% palm oil + 80% diesel) in a diesel engine to reduce exhaust emissions. Alkali transesterification of palm oil produces biodiesel. Different biodiesel blends are generated for fuel samples, including 95 percent biodiesel plus 5 percent butylated hydroxytoluene (P20BHT5) and 90 percent biodiesel plus 10 percent butylated hydroxytoluene (P20BHT10). According to the experimental examination, P20BHT5 and P20BHT10 emit much fewer oxides of nitrogen than P20 and diesel fuel. Additionally, the brake thermal efficiency (BTE) is considerably lower as compared to P20 when an antioxidant ingredient is added to the biodiesel in the engine. Also found was a modest increase in smoke, carbon monoxide, and hydrocarbon emissions when an antioxidant ingredient was added to P20.

22 March 2024 in Journal of Thermal Engineering
Verified
Journal Article
Open access
PDF file
RRRavisankar Rajendran
Ravisankar Rajendran
VVV.S.K. Venkatachalapathy
V.S.K. Venkatachalapathy
KVK. Velmurugan
K. Velmurugan
MEM. Elangovan
M. Elangovan
PBP. Balu
P. Balu
Energy is a fundamental necessity for man›s life in the digital world today. The rapid depletion of fossil fuel resources forces rigorous alternative fuel analysis. Petroleum diesel can better replace vegetable oils, edible or motored today. The rapid depletion of fossil fuel resources forces rigorous alternative fuel analysis. Petroleum diesel can better replace vegetable oils, edible or not. Karanja may be a possible supplier of diesel fuel for non-edible oil substitution. Current combustion surfaces for pistons, valves, and cylinders have been filled with ceramic materials, which make the engine totally adiabatic (LHR). The performance of a biodiesel-powered compressing ignition (CI) engine may be further boosted by utilising the engine›s heat effectively and increasing thermal efficiency. Exhaust Gas Recirculation (EGR) is actually one of the most important methods of limiting NOx emissions in internal combustion engines. Explore the output with and without exhaust gas recirculation on a retarded timing engine with diesel and karanja oil methyl ester (KOME). The LHR with a retarded timing engine yielded improved thermal brake efficiency (TBE), decreased HC, smoke, and CO emissions, while increasing KOME›s NOx in comparison with an uncoated engine. As the EGR rate grew, NOx and BTE were reduced marginally with increased HC, CO, and smoke. 24.1 g/kw-hour CO, 10.1 g/kw-hour NOx, and 0.55 g/kW-hour HC were registered at 20 percent of EGR.


31 March 2025 in Vidnovluvana energetika
Verified
Journal Article
Open access
PDF file
SKS. Kuppusamy
S. Kuppusamy
DSDh. Saravanan
Dh. Saravanan
KSK. Sudhakar
K. Sudhakar
BPB. Pandian
B. Pandian
Solar power offers a chance to decrease dependence on imported fossil fuels, a crucial consideration for nations heavily reliant on energy imports. Hybrid nanoparticles have been used for PV cooling to enhance the efficiency and perfor-mance of solar panels. This study investigates the use of nanofluids to improve power production, lifespan, and effi-ciency. Three photovoltaic panels with different cooling meth-ods were tested in this study. The effect of a 2 wt % Al2O3/ZnO hybrid nanofluid was assessed at flow speeds ranging from 1 to 3 liters per minute. Three panels, PV-1, PV-2, and PV-3, are used in this experiment. A 2 wt % hybrid nanofluid of Al2O3/ZnO is used to study the first solar panel (PV-1), often known as PV-one. The second solar panel (PV-2), called PV-two, is cooled using forced air and a 2 wt % hybrid nanofluid of Al2O3/ZnO. In contrast, PV-three, the third panel (PV-3), had no cooling. When an Al2O3/ZnO hybrid nanofluid with forced air was used, the electrical energy efficiency increased the most, at 17.9 %. Additionally, using a hybrid nanofluid of Al2O3/ZnO produced a 17.5 % outcome, whereas an uncooled panel produced a 15.1 % result. In contrast to the hybrid nanofluid, which had a temperature of about 9.4 °C, the hybrid nanofluid with forced air had a temperature increase of 9.8 °C. Compared to the uncooled panels, this resulted in an 11.2 % increase in output power. The maximum output powers for cooling with hybrid nanofluid with forced air, hybrid nanofluid, and uncooled panels were 45.6, 44.1, and 40.2 W, respectively. Additionally, the CFD was used to evaluate the serpentine pipe thermal performance.

29 March 2026 in Vidnovluvana energetika
Verified
Journal Article
Closed access
АВА. Віноткумар
А. Віноткумар
ПБП. Балу
П. Балу
ССС. Сараванан
С. Сараванан
КНКрішнан Наваніта
Крішнан Наваніта
ОСО. Соколовський
О. Соколовський
Environmentally sustainable and renewable fuels present clear advantages over conventional petroleum-based fuels, offering improved energy utilization and helping to alleviate environmental and socioeconomic concerns. Their adoption in transport and power production supports cleaner energy transitions and assists in addressing emission-driven climate change challenges. In this investigation, combustion performance and emission characteristics were improved by redesigning the piston bowl geometry to intensify air–fuel interaction and in-cylinder turbulence. Three combustion chamber configurations were examined: a toroidal re-entrant combustion chamber (TRCC), a standard toroidal combustion chamber (TCC), and a shallow re-entrant combustion chamber (SRCC). The results obtained with diesel fuel were compared against those achieved using an optimized best fuel (BF) blend. The TRCC configuration exhibited the most favorable performance. It delivered a 4.85 % increase in brake thermal efficiency (BTE) and achieved significant emission reductions, including 41.6 % lower hydrocarbon (HC) emissions, 52.4 % reduction in carbon monoxide (CO), and 68.9% decrease in smoke opacity compared with diesel operation. These outcomes highlight the effectiveness of combustion chamber modification in enhancing engine efficiency while substantially reducing exhaust pollutants.

30 March 2026 in Vidnovluvana energetika
Verified
Journal Article
Closed access
KСK. Секхаррадж
K. Секхаррадж
ПБП. Балу
П. Балу
AГA. Гіріпрасат
A. Гіріпрасат
CРC. Ратінасуріян
C. Ратінасуріян
ГДГ. Дідківська
Г. Дідківська
The increasing demands for sustainable energy and stringent emission regulations have prompted the exploration of alternative fuels in internal combustion engines. This study investigates the effects of conventional diesel and various biodiesel blends on the performance, emission, and combustion characteristics of direct injection (DI) diesel engines. The study aims to identify the most suitable biodiesel blend that can serve as a viable alternative to conventional diesel fuel, providing high engine efficiency with reduced environmental impact. The rise in consumption, environmental emissions, and the cost of petrol make the energy recovery from trash a top priority. Not only can biodiesel meet energy demands, but it can also reduce greenhouse gas emissions, making it an important source of renewable energy. An experimental study of diesel and many different biodiesel blends was conducted to analyse their performance, emissions, and combustion characteristics. To prepare the emulsified fuel and go on with further experimental work, this effort aimed to identify the optimal biodiesel blends. The results of this paper showed that among all other biodiesel blends with various compositions, Syzygy Cumini (SC) biodiesel 20% by volume with diesel (SC20) was the best mix. Based on the outcomes of performance, combustion, and emission metrics, it was selected. Overall, SC20 biodiesel was identified as the optimal blend, offering a promising balance between engine performance, combustion stability, and lower exhaust emissions, thus supporting its potential use in existing diesel engines without modifications.