6 June 2019 in Journal of Applied Polymer Science
13 September 2016 in RSC Advances
In order to improve the scale inhibition efficiency of existing scale inhibitors for industrial water and to reduce the phosphorus pollution of water bodies, a new type of scale inhibitor with a hyper-branched structure has been developed in this study. First, an AB′ type of functional monomer (AMA) was synthesized from maleic anhydride (MAH) and propylene glycol, then copolymerized with monomer B (MAH) through radical polymerization, resulting in a hyper-branched polycarboxylic acid. The synthesis conditions, such as reaction temperature and time, monomer ratio and initiator dosage, have been investigated for obtaining the expected hyper-branched polymer with good scale inhibition performance. The scale inhibition efficiency of the obtained products was determined according to their resistance to the crystallization of calcium sulfate and calcium carbonate under the optimal application conditions. The experimental results show that the hyper-branched polycarboxylic acid provides a scale inhibiting efficiency for CaCO3 and CaSO4 as high as 95.2% and 92.3%, respectively. In addition, XRD analysis showed that the good scale inhibition of the hyper-branched polycarboxylic acid is attributed to its ability to inhibit and destroy the formation of crystals, changing the crystal forms of the calcium scale. This conclusion indicates that the prepared hyper-branched polycarboxylic acid has great application potential in the treatment of industrial water.
5 September 2017 in New Journal of Chemistry
In this study, a new type of scale and corrosion inhibitors with hyper-branched structure has been developed. They have higher efficiency compared with the existing inhibitors used for industrial water treatment. The terminal amino phosphate group of hyper-branched polymers (HBPs) was synthesized through Michael addition and amidation reactions. The scale inhibition efficiency of the obtained products was determined according to their ability to prevent crystallization of calcium sulfate and calcium carbonate at the optimal application conditions. The experimental result shows that HBPs at 20 mg L−1 provides a scale inhibiting efficiency for CaCO3 and CaSO4 up to 96.7% and 93.9%, respectively. In addition, the effect of HBPs inhibition on A3 carbon steel corrosion in 3 wt% NaCl medium was investigated by the weight loss and electrochemical measurements. The polarization measurements indicate that the prepared HBPs act as a cathodic type inhibitor. The weight loss test shows that the corrosion inhibition efficiency depends on the concentration and reaches 91.3% at 100 mg L−1. The SEM and XRD analyses show that the good scale inhibition performance of HBPs is attributed to the ability to inhibit the formation of crystals and then destroy them. The study of the adsorption thermodynamics and the reaction kinetics of the corrosion process together with the SEM analysis show that the good corrosion inhibition of HBPs is derived from the carbon steel surface immersed in solution with HBPs which can induce the formation of a dense protective adsorption film layer, preventing the corrosion reaction with the surface of the carbon steel. The achieved results indicate that the prepared HBPs have a great potential for application in industrial water treatment.
1 September 2017 in Journal of Molecular Structure
15 January 2019 in ChemistrySelect
24 February 2018 in Journal of Applied Polymer Science