Environmental Science and Technology Research Center, Department of Environmental Health Engineering, School of Public Health, Shahid Sadoughi University of Medical Sciences, Yazd, Iran
Auto-generated profile, based on publicly available information
Arash Dalvand
Environmental Science and Technology Research Center, Department of Environmental Health Engineering, School of Public Health, Shahid Sadoughi University of Medical Sciences, Yazd, Iran
In this research, the adsorption of the Direct Red 23 dye from synthetic textile wastewater using nanoclay was studied in a batch system. The properties of nanoclay were investigated by scanning electron microscope, Fourier transform infrared, and EDX analysis. The specific surface area of the nanoclay was determined using Sear's method. The results revealed that with increasing adsorbent dose and contact time and decreasing pH, ionic strength, and adsorbate concentration, dye removal efficiency has increased. Nanoclay could remove 99.4% dye from the solution containing 50 mg/L dye at 30 min. The results indicated that dye removal followed pseudo-second-order kinetic (R2 > 0.99) and the Langmuir isotherm. According to the findings, nanoclay is an effective adsorbent for direct dye removal from wastewater.
6 April 2020 in International Journal of Environmental Analytical Chemistry
In the present study, the efficiency of amine-functioned Fe3O4 magnetic nanoparticles with L-arginine (Fe3O4@L-arginine) for the removal of RB5 azo dye from aqueous solution was investigated. Box–Behnken design was used to design the experiments and optimise the adsorption parameters. The results showed that Fe3O4@L-arginine nanoparticles were synthesised successfully. Optimum conditions for dye adsorption were obtained at a dye concentration of 50 mg/L, adsorbent dose of 0.8 g/L and pH 3 with an efficiency of 97.6% that was close to the model’s prediction percentage (96.8%), which confirms the validity of the model. The RB5 dye adsorption followed the pseudo-second-order kinetic model and the Temkin isotherm model, and the adsorption was a spontaneous endothermic process. The results illustrated that the Fe3O4@L-arginine nanoparticles can be used for RB5 dye adsorption by maintaining high efficiency for several times. Therefore, Fe3O4@L-arginine nanoparticles because of their high performance, easy synthesis and use and ease of separation are suitable adsorbents to remove dye from the coloured wastewater.
27 October 2020 in Korean Journal of Chemical Engineering
In this study, the efficiency of Integrated Fixed-film Activated Sludge (IFAS) system in synthetic greywater treatment and nutrients removal was studied in duration of 105 days according to different Organic Loadings Rates (OLRs). The study was operated in pilot-scale and OLRs of 0.11–1.3 gCOD/L.d. Scanning Electron Microscope (SEM) image showed that the biofilm with a proper thickness was formed on IFAS reactor’s media. The results indicated that the best removal efficiency of BOD5, COD, and TSS were 85.24, 92.52 and 90.21%, respectively, in an organic loading of 0.44 gCOD/L.d. Then, with the OLR increased, the removal efficiencies of BOD5, COD, and TSS increased as long as the organic loading reached 0.44 gCOD/L.d. But with the OLR increased more, the removal efficiency of these parameters decreased. The ANOVA statistical test results showed that the mean difference of removal efficiency in organic loadings for BOD5 (p ≤ 0.001) and COD (p = 0.003) was significant, while it was insignificant for TSS (p = 0.23). The best removal efficiencies of Total Nitrogen (TN) and Total Phosphorus (TP) were 89.60 and 86.67%, respectively, which were obtained at an OLR of 0.44 gCOD/L.d. By increasing OLR up to 0.44 gCOD/L.d, removal efficiencies of TN and TP increased, while the removal efficiency decreased with the OLR increased more, and this difference was statistically significant (p = 0.021). Finally, the results showed that the IFAS system provided a proper efficiency in treatment of the synthetic greywater and it could be used in a full scale.