27 January 2021 in International Journal of Chemical Engineering
Compared with the common marine renewable energy sources like solar, wind, and wave energy, etc., the hydraulic pressure stored in the deep seawater can output stable and successive energy flow. Thus, it can be directly coupled with the reverse osmosis (RO) process to supply drinkable mineral water for crews of Deep Sea Space Station (DSSS). We proposed a novel submarine RO desalination system driven by the hydraulic pressure of deep seawater (SHP-RO), composed of a desalination branch to generate fresh water and a back pressure branch to ensure the depth independence of the desalination. The influences of the deep sea environment on the RO were analyzed, based on which the pretreatment of the seawater and the preparation of the drinkable mineral water were studied. The turbine-based energy recovery scheme was investigated in virtue of the CFD simulation on the flow behavior in the different turbine series. It was predicted that, when the DSSS was located at the depth of 1100m and the operating pressure of the RO process was 6.0MPa, for a drinkable water production rate of 240m3/d, the recovered hydraulic pressure energy can achieve 39.22kW·h, which was enough for driving electricity consumers in the SHP-RO system.
8 March 2023 in International Journal of Chemical Engineering
In this paper, the composition of binary nonazeotropic working fluids is explored from the perspective of improving OTEC-ORC efficiency, and the turbine is designed to accommodate with the working fluid. It is found that the OTEC-ORC using a R152a/R32 mixture as the working fluid is significantly higher than the OTEC-ORC thermal efficiency and system efficiency of the pure NH3, and the optimal composition of the mixed working fluid R152a/R32 is determined to be 85:15 with the thermal efficiency and the system efficiency of 2.8 and 1.7, respectively, improving by 35.7 and 151.2 compared to the NH3 ORC. According to the determined working fluid, a one-dimensional (1-D) design and CFD simulation analysis simulation are carried out on the turbine. The 1-D calculation results are in good agreement with the three-dimensional (3-D) results. At the design point, the turbine output is 83.84kW, and the isentropic efficiency is 87.53. At the off-design point, turbines have better off-design performance, indicating that the designed turbine also has good adaptability.