An inhomogeneous acoustic metamaterial lens based on spatial variation of refractive index for broadband focusing of underwater sound is reported. The index gradient follows a modified hyperbolic secant profile designed to reduce aberration and suppress side lobes. The gradient index (GRIN) lens is comprised of transversely isotropic hexagonal microstructures with tunable quasi-static bulk modulus and mass density. In addition, the unit cells are impedance-matched to water and have in-plane shear modulus negligible compared to the effective bulk modulus. The flat GRIN lens is fabricated by cutting hexagonal centimeter scale hollow microstructures in aluminum plates, which are then stacked and sealed from the exterior water. Broadband focusing effects are observed within the homogenization regime of the lattice in both finite element simulations and underwater measurements (20–40 kHz). This design approach has potential applications in medical ultrasound imaging and underwater acoustic communications.
Although recent advances have made it possible to manipulate electromagnetic and acoustic wavefronts with sub-wavelength metasurface slabs, the design of elastodynamic counterparts remains challenging. We introduce a novel but simple design approach to control SV-waves in elastic solids. The proposed metasurface can be fabricated by cutting an array of aligned parallel cracks in a solid such that the materials between the cracks act as plate-like waveguides in the background medium. The plate array is capable of modulating the phase change of SV-wave while keeping the phase of P-wave unchanged. An analytical model for SV-wave incidence is established to calculate the transmission coefficient and the transmitted phase through the plate-like waveguide explicitly. A complete 2π range of phase delay is achieved by selecting different thicknesses for the plates. An elastic metasurface for splitting SV- and P-waves is designed and demonstrated using full wave finite element simulations. Two metasurfaces for focusing plane and cylindrical SV-waves are also presented.
1 June 2016 in The Journal of the Acoustical Society of America
Gradient index (GRIN), refractive, and asymmetric transmission devices for elastic waves are designed using a solid with aligned parallel gaps. The gaps are assumed to be thin so that they can be considered as parallel cracks separating elastic plate waveguides. The plates do not interact with one another directly, only at their ends where they connect to the exterior solid. To formulate the transmission and reflection coefficients for SV- and P-waves, an analytical model is established using thin plate theory that couples the waveguide modes with the waves in the exterior body. The GRIN lens is designed by varying the thickness of the plates to achieve different flexural wave speeds. The refractive effect of SV-waves is achieved by designing the slope of the edge of the plate array, and keeping the ratio between plate length and flexural wavelength fixed. The asymmetric transmission of P-waves is achieved by sending an incident P-wave at a critical angle, at which total conversion to SV-wave occurs. An array of parallel gaps perpendicular to the propagation direction of the reflected waves stop the SV-wave but let P-waves travel through. Examples of focusing, steering, and asymmetric transmission devices are discussed.
1 May 2019 in International Journal of Solids and Structures
Directional sound sensing plays a critical role in many applications involving the localization of a sound source. However, the sensing range limit and fabrication difficulties of current acoustic sensing technologies pose challenges in realizing compact subwavelength direction sensors. Here, a subwavelength directional sensor is demonstrated, which can detect the angle of an incident wave in a full angle range (0°∼360°). The directional sensing is realized with acoustic coupling of Helmholtz resonators each supporting a monopolar resonance, which are monitored by conventional microphones. When these resonators scatter sound into free‐space acoustic modes, the scattered waves from each resonator interfere, resulting in a Fano‐like resonance where the spectral responses of the constituent resonators are drastically different from each other. This work provides a critical understanding of resonant coupling as well as a viable solution for directional sensing.
Acoustic materials displaying coupling between pressure and momentum are known as Willis materials. The simplest Willis materials are comprised of subwavelength scatterers that couple monopoles to dipoles and vice versa, with the interaction defined by a polarizability tensor. We propose a method for retrieving the polarizability tensor for subwavelength Willis acoustic scatterers using a finite set of scattering amplitudes. We relate the polarizability tensor to standard T-matrix and S-matrix scattering formalisms. This leads to an explicit method for retrieving the components of the polarizability tensor in terms of a small set of scattered pressure data in the near or far field. Numerical examples demonstrate the retrieval method for one- and two-dimensional configurations.