This brief presents a high precision high-order curvature-compensated bandgap voltage reference (BGR) with a 3.11-V output voltage for battery-management integrated circuits. The proposed circuit utilizes the exponential characteristics of the base current and the resistance between bases of bipolar transistors to perform corrections. The curvature of subthreshold-operating MOSFETs is considered to further compensate for high-order temperature effects over a wide temperature range of 170 °C. Test results for the proposed BGR fabricated utilizing a standard 0.18-μm BiCMOS process demonstrate that its line regulation is approximately 0.31 mV/V in a supply voltage range of 4.2-6.0 V. with 4-bit trimming, a temperature coefficient of 4.6 ppm/°C is obtained in the range of -40 °C to 130 °C. The active area of the proposed BGR is 634 × 351 μm.
25 March 2025 in IEEE Transactions on Circuits and Systems I: Regular Papers
The demand for compact battery management systems (BMS) in applications such as two-wheelers and uninterruptible power supplies has driven the development of battery management integrated circuits (BMICs). These BMICs incorporate functions such as battery sensing, fault detection, and protection management. This paper introduces an 18-cell lithium-ion battery sensing and protection BMIC, designed to enable the implementation of a compact BMS. Additionally, a high-order temperature-compensated bandgap reference (BGR) structure, with a temperature coefficient of 5 ppm/∘C, is proposed to deliver a high-precision reference for sensing and comparison. The chip also integrates power management circuits capable of handling input voltages up to 90 V, thereby powering low-voltage modules. It features an 18-channel multiplexer for selectively detecting high-voltage, series-connected battery packs and achieving on-chip cell balancing through sequential control. Furthermore, a current-sense amplifier and programmable overcurrent protection circuits are included to reliably detect charging and discharging currents in the battery packs. The proposed BMIC occupies an area of 3 mm × 3.3 mm and is fabricated using a 180 nm BCD process. The total current consumption of the chip during normal operation is 65.1 μA, which can be reduced to 2 μA in shutdown mode to minimize long-term battery pack losses.
This work presents a high-precision high-order curvature-compensated bandgap voltage reference (BGR) for battery monitoring applications. The collector currents of bipolar junction transistor (BJT) pairs with different ratios and temperature characteristics can cause greater nonlinearities in ΔVEB. The proposed circuit additionally introduces high-order curvature compensation in the generation of ΔVEB, such that it presents high-order temperature effects complementary to VEB. Fabricated using a 0.18 µm BCD process, the proposed BGR generates a 2.5 V reference voltage with a minimum temperature coefficient of 2.65 ppm/°C in the range of −40 to 125 °C. The minimum line sensitivity is 0.023%/V when supply voltage varies from 4.5 to 5.5 V. The BGR circuit area is 382 × 270 μm2, and the BMIC area is 2.8 × 2.8 mm2.