5 February 2019 in IEEE Transactions on Industrial Electronics
12 September 2019 in IEEE Transactions on Industrial Electronics
This paper develops a modified dynamic reluctance mesh (DRM) method that can be utilized to calculate and analyze the magnetic field of the iron-cored tiered type permanent magnet spherical motor (T-PMSpM) effectively and efficiently, with the multi-degree-of-freedom (multi-DOF) movements taken into account. According to the structural characteristic of the iron-cored T-PMSpM, the tilting function part, including the tilting stator and rotor, is equivalent to a dynamic lumped-parameter magnetic network model. Besides, the magnetic saturation phenomenon of the iron materials is also considered. The DRM results of magnetic field distribution, flux linkage and back-EMF show a good agreement with the 3D FEM results. For further verification, a prototype motor of the iron-cored T-PMSpM has been manufactured. The back-EMF curves with different rotor tilting positions are measured by experiments and compared with the calculated results.
15 January 2020 in IEEE Access
This paper proposes a novel tiered type permanent magnet spherical motor (T-PMSpM), which has the advantage of relatively larger torque ability compared with most existing spherical motors. The proposed T-PMSpM is capable of continuously rotating while the rotating shaft can tilt in all directions. Considering that it is usually much difficult to measure the multi-DOF rotor orientation of a spherical motor in an easy and convenient way, this paper also proposes a specific rotor orientation measurement method, aiming at providing an idea of simple solution for detecting the multi-DOF rotor orientation based on phase difference. In order to clearly reveal the intrinsic relationship between the phenomenon of phase shift and the tilting motion, a simplified back-EMF model of the T-PMSpM is put forward according to the geometric changes as the rotor tilts. Based on the simplified back-EMF model, both the initial phase and the magnitude of the back-EMF are calculated analytically and verified by the 3D FEM. The full region forward relationship between the rotor tilting position and the phase difference is further obtained. Therefore, the rotor tilting position can be easily identified based on the inverse solution. Finally, a prototype motor of the investigated T-PMSpM has been manufactured. The experimental results validate that the multi-DOF orientation can be detected effectively with enough accuracy.
10 June 2020 in IEEE Transactions on Industrial Electronics
This paper mainly studies the tilting torque characteristic of a novel iron-cored tiered type permanent magnet spherical motor (T-PMSpM), which has the merit of large torque ability benefitted from the use of iron cores in both rotor and stator. However, the use of ferromagnetic materials also makes the iron-cored T-PMSpM much different from other air-cored spherical motors. Thus, the influence on the tilting torque characteristic is investigated theoretically and numerically. First of all, the active tilting torque is obtained based on a simplified model of air-gap magnetic field distribution. According to this model, the influence of the magnetic field distortion caused by the tilting motion is evaluated. Then, the characteristic of the restoring torque, which obviously exists in the iron-cored T-PMSpM and hinders the tilting motion, is analyzed in different working conditions. The 3D FEA is adopted to calculate the accurate output tilting torque. Finally, an experimental procedure is designed to measure the output tilting torque of the prototype motor for verification. The measured results are compared with the FEA results.
26 April 2017 in IEEE Transactions on Magnetics
Magnetic levitation positioning systems (MLPSs) are of great interest in high-precision applications in vacuum. In this paper, a linear magnetic bearing with rhombus magnet array (RMA-LMB) for MLPS is proposed. With the RMA, the proposed RMA-LMB possesses advantages of excellent force uniformity, high force density, and good manufacturability. First, the basic structure and operating principle of the proposed RMA-LMB are presented. Second, the expressions of magnetic field, static force and torque, and dynamic force and torque are obtained by an equivalent current model. Third, the 3-D finite-element analysis (3-D FEA) is employed to investigate the RMA-LMB, and the magnetic field distribution, the static force and torque, as well as the dynamic force and torque are analyzed. Finally, a prototype is constructed, and experiments show a good agreement with the FEA results.
3 August 2020 in IEEE Transactions on Industry Applications
This paper mainly investigates the torque characteristic of a novel tiered type permanent magnet spherical motor (T-PMSpM), which has the advantage of relatively larger torque ability compared with most existing spherical motors. The investigated T-PMSpM is capable of continuously rotating while the rotating shaft can tilt in all directions. Therefore, both the rotating torque and tilting torque need to be studied. Considering that the rotating principle is similar to the conventional permanent magnet synchronous motors, more attention is being paid to the tilting performance since it also decides the tilting range of the T-PMSpM. Firstly, the key factors that significantly influence the tilting torque are found out based on the analytical expression of the tilting torque. Then, these key factors are analyzed aiming at expanding the tilting range as well as the magnitude of the tilting torque. Finally, the rotating torque is obtained and analyzed based on the above optimized structure. The three-dimensional (3-D) finite-element method (FEM) is adopted for accurate calculation. A prototype motor of the T-PMSpM has been manufactured, and an experimental procedure is designed to measure the output torque for verification.