1 May 2009 in Biomass and Bioenergy
1 January 2009 in Chemical Industry and Chemical Engineering Quarterly
The use of biofuels as an alternative to fossil fuels has expanded in the last few decades. The aim of this study was to examine the application of different strains and forms of Saccharomyces cerevisiae for raw, thin and thick juice fermentation in order to produce bioethanol. According to the obtained results the strain applied in the form of pressed blocks with 70 % w/w moisture, attained higher value of the specific growth rate and lower value of ethanol yield in comparison with strains applied in dried form. In all culture media attained efficiency of sugar utilization was at least from 98-99 % w/w. Maximum productivity was achieved around 30th hour of fermentation and amounted ?1.8 g l?? h?? for all applied yeast strains. Therefore, optimal duration of the process in technical and economic terms should be considered.
1 January 2017 in Hemijska industrija
Wine industry generates large volumes of wastewaters resulting from numerous cleaning operations that occur during the different stages of winemaking. Disposal of these effluents in the environment causes huge problems due to their high organic and inorganic load and seasonal variability. The bioconversion of winery wastewaters in valuable product, such as xanthan, is an important alternative to overcome environmental problems. In this research, the possibility of xanthan production using Xanthomonas campestris on blended wastewaters from different stages of white and rose wine production with initial sugar content of 50 g/L was investigated. In addition to the media parameters (content of sugars, total and assimilable nitrogen, phosphorus, total dissolved salts and apparent viscosity), raw xanthan yield and degree of sugar conversion into product were determined in order to examine the success of xanthan biosynthesis. In applied experimental conditions, xanthan yield of 20.92 and 30.64 g/L and sugar conversion into product of 40.23 and 60.73% were achieved on wastewaters from white and rose wine production, respectively. The results of these experiments suggest that winery wastewaters, after additional optimization of the process in terms of the substrate composition and the cultivation conditions, may be a suitable raw material for industrial xanthan production.
1 January 2020 in Journal of the Serbian Chemical Society
Wheat chaff as an agricultural waste represents a cheap raw material for biotechnological processes. With its lignocellulosic composition, it is suitable for producing hydrolytic enzymes for second generation renewable fuel production technologies. The aim of this work was to optimize the process parameters (cultivation temperature 25?35?C, pH value 4?6 and cultivation time 3?7 days) of the cultivating fungi (Trichoderma reesei QM 9414) on a media based on wheat chaff by submerged and solid-state techniques, in order to enhance and compare the two types of simultaneous cellulase and xylanase production. Optimal conditions for the submerged fermentation were 29.65?C for temperature, pH 4.27 and 7 days of cultivation, while for the solid-state fermentation, the optimal conditions were 28.01?C, pH 6.00 and 7 days. The cellulolytic and xylanolytic activities of the obtained cultivation broth filtrates were 0.0535 and 0.1676 U mL-1 for the submerged fermentation, and 0.0407 and 0.1401 U mL-1 for the solid-state fermentation, respectively, and with a 26.77 and 13.39 % enhancement of enzyme activity for submerged fermentation, and a 22.96 and 42.66 % enhancement for solid-state fermentation, respectively, compared to the results obtained before optimization.
1 January 2011 in Acta Periodica Technologica
Methods that can provide adequate accuracy in the estimation of variables from incomplete information are desirable for the prediction of fermentation processes. A feed-forward back-propagation artificial neural network was used for modelling of thick juice fermentation. Fermentation time and starting sugar content were usedas input variables, i.e. nodes. Neural network had one output node (ethanol content, yeast cell number or sugar content). The hidden layer had nine neurons. Garson's algorithm and connection weights were used for interpreting neural network. The inadequacy of Garson's algorithm can be seen by comparing with the results of regression analysis, which indicates that the influence of the fermentation time is higher. A better agreement of the results was obtained using network connection weights, a method that can be used to determine the relative importance of input variables.
1 January 2019 in Hemijska industrija
RPRadmila Pajovic-Scepanovic
Radmila Pajovic-Scepanovic
Bioethanol technology represents an important scientific research area because of the high market value and wide availability of its primary and by-products. Worldwide interest in utilizing bioethanol as a renewable and sustainable energy source has significantly increased in the last few years due to limited reserves of fossil fuels and concerns about climate change. Therefore, improvement of the bioethanol production process is a priority research field at the international scale, due to both economic and environmental reasons. The aim of this study was to optimize production of bioethanol from soybean molasses based media using response surface methodology. Three different strains of the yeast Saccharomices cerevisiae, commercially available in dried form, were used as production microorganisms, and the best results were obtained by using dried baker?s yeast. The results of optimization of alcoholic fermentation using dried baker?s yeast indicate that the highest value of the overall desirability function (0.945) is obtained when the initial sugar content is 18.10 % (w/v) at the fermentation time of 48.00 h. At these conditions the model predicts that bioethanol concentration is 8.40 % (v/v), yeast cell number 2.21?108 cells/mL and the residual sugar content is 0.35 % (w/v).