13 December 2022 in Rock Mechanics and Rock Engineering
This study elucidates the possibility of CO2 injection-induced formation of a complex cloud-fracture network (CFN) in granite, along with shearing (shear slip) of natural pre-existing fractures under conventional (~ 150–300 °C) and superhot (> ~ 400 °C) geothermal conditions, potentially providing additional connecting flow paths between the stimulated natural fractures. Here, we conduct a set of experiments under triaxial stress states at 150 °C and 450 °C on cylindrical granite samples containing a sawcut (representing a natural fracture) inclined 45° from the sample’s axis. CO2 injection induced dynamic shear slip on the sawcut, with higher slip velocities at 150 °C owing to the higher elasticity of the rock than that at 450 °C. The lower viscosity of CO2 also allowed it to more uniformly pressurize the sawcut, resulting in higher slip velocities and slip displacements compared with those based on water injection in the 150 °C experiments. This implies that under conventional geothermal conditions, CO2 injection can stimulate the same volume of rock as that of water injection at lower injection-well pressures. The CFNs then formed via CO2 injection at pressures similar to those predicted by the Griffith failure criterion as the sawcut shear slip progressed at both experimental temperatures. The experiments also revealed potential challenges associated with CO2 injection in naturally fractured geothermal environments, such as narrow aperture CFNs, owing to decreasing differential stress during their formation; all these factors should be addressed in future research.
17 April 2023 in Geothermal Energy
Recent researches have proposed the use of enhanced geothermal system reservoirs consisting of dense networks of microfractures, created by hydraulic and/or thermal fracturing in superhot/supercritical geothermal environments, because of their suitability for thermal energy harvesting. During fracturing and energy extraction, the fracture networks are exposed to cooling due to the injection of cold fluid into the reservoirs. Previous studies showed such cooling enhanced reservoir permeability in conventional geothermal environments. However, the cooling may result in a higher risk of seismicity, owing to decreased normal stress on the fractures. Nevertheless, it is unclear whether cooling-induced permeability enhancement and a higher risk of seismicity occurs within networks of microfractures which consist of numerous interconnected microfractures at various orientations to the in situ triaxial stress. Thus, no dominant fractures have the possibility to cause permeability enhancement/induced seismicity. In this study, results are presented for borehole cooling experiments on a dense network of microfractures in granite, at 400 °C, under true triaxial stress. Permeability and acoustic emissions were measured with decreases in borehole temperature (up to ~ 90 °C). Results showed that permeability increased with increasing temperature drop at relatively low stress levels (15 and 20 MPa). The permeability enhancement occurred without intensive failure, and was reversible. However, permeability was almost constant at a higher stress level (65 MPa). Results showed that permeability enhancement required a thermal stress equivalent to the mean stress, so that the normal stress was reduced to near-zero, for a considerable amount of the microfractures. Additionally, the permeability of dense microfracture networks can be increased by cooling primarily through thermo-elastic deformation (without intensive failure), which may be useful to compensate for the reduction in injectivity due to cooling-induced fluid property changes.