This paper introduces the orthogonal chirp division multiplexing (OCDM) for baseband data communication systems. The OCDM scheme uses the discrete Fresnel transform in an analogous fashion as the orthogonal frequency division multiplexing (OFDM) uses the discrete Fourier transform. In this regard, this paper outlines the design of types of the OCDM schemes that allow data communication using real-valued time-domain signals and, as a consequence, making possible the application of the OCDM scheme in power line communication systems, which is supposed to operate in the baseband. Numerical analyses show that under the hardness of a noisy environment, the OCDM scheme is able to soften the impulsive noise effects better than previous schemes. Also, the OCDM scheme yields better results when the channel length is unknown, in comparison to Hermitian symmetric OFDM and single carrier–cyclic prefix schemes. Finally, the findings related to the OCDM scheme for baseband data communication are similar to those related to the passband one.
This study presents a comprehensive analysis to highlight advantages and disadvantages, in terms of channel capacity and computational complexity (CC), of a so‐called clustered‐orthogonal frequency division multiplexing (OFDM) scheme for power line communication (PLC) technologies for access networks. By taking into account filtering, decimation and upsampling techniques, the implementations of two transmitter schemes, named (·)‐I and (·)‐II, and three receivers ones, named (·)‐I, (·)‐II and (·)‐III, that can be easily derived from the hermitian symmetric OFDM (HS‐OFDM) scheme are discussed. Numerical results show that the clustered‐OFDM schemes based on HS‐OFDM provide the same bit‐error‐rate performance as that of HS‐OFDM, double sideband‐OFDM and single sideband‐OFDM. Also, clustered‐OFDM based on the combination of (·)‐II and (·)‐III offers the lowest CC for both baseband and passband data communications. Further, it is demonstrated that the clustered‐OFDM schemes can trade off channel capacity for CC, which can give rise to low‐priced transceivers for PLC technologies. Finally, a comparative analysis of clustered‐OFDM and orthogonal frequency division multiple access (OFDMA) points out the scenarios in which clustered‐OFDM can be competitive if the complexity of the OFDM transceiver is a primary consideration.
1 January 2018 in Journal of Communication and Information Systems
This work organizes and discusses important information on resource allocation in power line communication (PLC) systems based on the Hermitian symmetric orthogonal frequency-division multiplexing scheme. In the context of this work, the term resource refers to bits and transmission power, which can be optimally or sub-optimally allocated to subcarriers on the basis of the knowledge of the normalized signal-to-noise ratio (nSNR) of power line subchannels. In this sense, we thoroughly discuss the formulation of the resource allocation for PLC systems and accordingly derive expressions for the nSNR as well as bit and transmission power allocation in all subchannels. Additionally, we precisely detail greedy algorithms to assist practitioners and researchers in the implementation of the resource allocation procedure. Considering a frequency-selective PLC channel corrupted by additive colored Gaussian noise as well as M-ary pulse amplitude modulation and quadrature amplitude modulation as modulation schemes, the influence of the gap from the Shannon capacity curve on symbol error rate probability is discussed. On top of the carried out discussion, numerical results are presented in order to emphasize the usefulness of a proper comprehension of this subject.
This paper discusses the two-stage single-relay channel model for in-home broadband power line communication links with up to two hops. This channel model consists of the concatenation of two single-relay channels that can result in eight configurations; however, only five of them are analyzed in this work since they cover up to one relay availability. In this context, a discussion addressing both amplify-and-forward and decode-and-forward cooperative protocols at relay node and maximal ratio combining at destination node is carried out. As the power line channels are frequency selective, the attenuation profile increases along with both distance and frequency, and the additive noise is colored, we discuss achievable data rate analyses using a data set covering the frequency band from 1.7 to 100 MHz, under sum power constraint. Based on the attained results, we state that the two-stage single-relay channel model is the best option for in-home broadband power line communication systems when the source-to-destination link is severely degraded (e.g., high signal attenuation and/or high-power noise presence), while the two-hop channel model is more appropriate when the channel degradation is not severe. Moreover, we show that the single-relay channel model may be remarkably outperformed by the two-stage single-relay channel model.