20 September 2023 in Materials Letters
4 March 2025 in Materials Today Communications
1 January 2026 in Surfaces and Interfaces
18 August 2026 in Thin Solid Films
15 June 2026 in SSRN Electronic Journal
In this work WO3 films containing carbon (WO3/C) were obtained, and their chemical composition, structure, morphology, density and roughness were investigated. Deposition was carried out using bis(cyclopentadienyl) tungsten dihydride (WH2Cp2) and ozone (O3) as first and second reactants, respectively, on the surface of monocrystalline silicon and on the indium-tin-oxide (ITO) whisker array. Presence of carbon in films was achieved through short-term pulses of O3, and its content was varied by changing the deposition temperature. Growth rate remains constant in temperature range 150-250 °C. Obtained films contain amorphous carbon particles consisting of comparable numbers of carbon atoms in sp2 and sp3 hybridisation and having a low hydrogen content. Furthermore, dispersed amorphous carbon makes films brown.
24 December 2025 in Journal of Vacuum Science & Technology A
This study investigated the problem of lanthanum oxide uniform growth by atomic layer deposition (ALD) using water as the oxygen reagent. Although water is the classic reagent for ALD, it can be the reason for some problems (e.g., nonuniformity) with hygroscopic oxides (such as lanthanum oxide). There are some ways to improve coating quality: increase the purge duration after the water pulse, increase the synthesis temperature with the water process, and replace the oxygen reagent (e.g., for ozone). In this work, ways to improve were studied in the processes of coating growth using La(iPrCp)3. Spectral ellipsometry was used to study the thickness of the coatings. X-ray photoelectron spectroscopy with argon ion etching was used to investigate the chemical composition. X-ray diffraction and x-ray reflectometry were used to define structural properties. The influence of the purge duration after water and the reactor temperature was defined. The ALD parameters of La(iPrCp)3 and ozone were investigated. The dependence of coating characterization on oxygen reagent was researched. No improvements in uniformity were found in the synthesis using water; at the same time, the positive effect of ozone on the coating uniformity was confirmed. Ozone as a replacement for water helps to increase the uniformity of the coating by about 10 times. Coatings obtained with ozone are more similar to lanthanum oxide, and those obtained with water are more similar to lanthanum hydroxide.