10 October 2022 in IEEE Transactions on Industrial Electronics
This article proposes a new pixel circuit that is operated at a low frame rate using low-temperature polycrystalline silicon thin-film transistors (TFTs) for use in active-matrix organic light-emitting diode (AMOLED) smartwatch displays. The proposed circuit uses a new leakage-prevention method (LPM) to balance the off currents at the gate node of the driving TFTs, eliminating the drop of the driving voltage. Uniform OLED currents are thus generated throughout the extended emission period. Also, the OLEDs are all turned off except in the emission stage to suppress image flicker. To confirm the feasibility of the proposed pixel circuit, a 1.41-inch panel, based on the proposed circuit, is fabricated. Experimental results demonstrate that diminishing the off currents maintains the driving capability of the pixel circuit to stabilize the luminance of the fabricated panel. The exhibitions of red, green, blue, and white images at frame rates from 60 Hz to 15 Hz are uniform, verifying that the proposed pixel circuit with LPM has high potential for use in AMOLED smartwatch displays with a low frame rate.
12 October 2023 in IEEE Journal of the Electron Devices Society
This work proposes a novel pixel circuit using analog pulse width modulation (PWM) for micro light-emitting diode (micro-LED) displays. The proposed circuit generates uniform sweep waveforms and driving currents to control micro-LED emission precisely by compensating for threshold voltage (VTH) variations of p-type low-temperature polycrystalline silicon thinfilm transistors (LTPS TFTs) and VDD current-resistance drops (IR drops). Driven by the PWM method, micro-LED can operate with high wall-plug efficiency (WPE), leading to low power consumption. To analyze the circuit performance, the electrical characteristics of a micro-LED and LTPS TFTs are measured to establish the simulated models. The HSPICE simulation results present that the current error rates and time shift rates of emission currents are below 1.65% and 2.75%, respectively, with ±0.3 V variations in VTH and 1.2 V drops in VDD. Furthermore, the power improvement relative to a 7T1C pulse amplitude modulation (PAM) circuit is higher than 19.05% at all gray levels, confirming that the proposed circuit is suitable for use in micro-LED displays.
31 March 2021 in IEEE Transactions on Electron Devices
A new leakage-prevention pixel circuit is proposed to maintain the driving capability of its driving thin-film transistors (TFTs) at a low frame rate of 15 Hz for use in active-matrix organic light-emitting diode (AMOLED) displays. The proposed leakage-prevention mechanism generates a compensating leakage current that reduces the source-to-drain voltage of the switching TFT, thereby lessening the fluctuation of the stored driving voltage when the frame rate is reduced from 60 to 15 Hz. Moreover, the proposed circuit can compensate for the threshold voltage variation in low-temperature polycrystalline silicon TFTs (LTPS TFTs) and current-resistance drops in VDD lines. To validate the performance of the compensation and leakage prevention, simulation models based on the measurement of the fabricated LTPS TFTs and an organic light-emitting diode (OLED) are established. The experimental results confirm that the leakage current of the gate node is successfully suppressed from 50.34 to 1.25 pA by the proposed leakage-prevention mechanism. Also, within the long emission period, the highly uniform OLED currents at low, medium, and high gray levels are achieved, verifying the feasibility of the proposed pixel circuit.
15 March 2022 in IEEE Journal of the Electron Devices Society
This paper proposes a mini-light-emitting diode (mini-LED) driving circuit that is driven by pulse width modulation (PWM) for the backlights of active-matrix (AM) liquid crystal displays (LCDs). The proposed circuit compensates for threshold voltage (V TH ) variations of low-temperature poly-crystalline silicon thin-film transistors (LTPS TFTs) and the current-resistance (I-R) rise in VSS lines to supply a stable driving current. Operating the mini-LED at the high luminous efficacy by the PWM driving method and setting only the driving TFT on the path of the driving current reduce the power consumption of the backlight. Based on a 2.89-inch LCD panel with an AMLED $48\times48$ backlit module, the TFTs are fabricated, measured, and fitted. Simulation results show that the relative current error rates are all below 4.67% when the V TH of the driving TFT varies by ±0.3 V and the VSS rises by 0.5 V. The voltage across VDD and VSS of the proposed circuit is 4.5 V lower than that of the 6T1C compensating driving circuit, so the power consumption of the circuit is at least 27.05% lower. Therefore, the proposed driving circuit is well suitable to use in mini-LED backlit LCDs.
8 March 2019 in IEEE Transactions on Electron Devices
This paper presents a novel bidirectional gate driver circuit based on hydrogenated amorphous silicon thin-film transistors (TFTs), especially for use in active-matrix liquid-crystal displays with in-cell touch technology. The proposed circuit exploits the time-division driving method to implement the in-cell touch panels with a high report rate and prevent the distortion of touch signals. The proposed structure employs a highly reliable precharging circuit to ameliorate the degradation of the driving TFT during the long-term touch-sensing stages. The output TFTs in the precharging structure are activated only once at the end of the touch-sensing stage in a frame, effectively extending the lifetime of the circuit. The experimental and simulated results illustrate that the proposed gate driver circuit generates uniform output waveforms regardless of whether the circuit operates in forward and backward transmission or stops in any row. To verify the high reliability of the proposed gate driver circuit, long-term stress tests at 85 °C are conducted. After the proposed circuit is operated for 720 h, the falling time of the output waveforms after the touch-sensing stage slightly varies by only 0.51 μs, confirming that the output TFT in the proposed precharging structure with a low duty ratio of 0.15% can achieve the high reliability of the proposed circuit. Therefore, the proposed gate driver circuit is highly feasible for use in high-reportrate in-cell touch panels.
5 August 2024 in IEEE Transactions on Electron Devices
This work proposes a new pixel circuit that is based on low-temperature polycrystalline silicon and oxide (LTPO) thin-film transistors (TFTs) for use in low-frame-rate smartwatch active-matrix organic light-emitting diode (AMOLED) displays. The LTPO circuit features a leakage-balancing structure that includes amorphous indium-gallium-zinc oxide (a-IGZO) TFTs, which suppresses voltage distortion at the gate node of the driving TFT (D-TFT) and stabilizes the OLED current ( ${I}_{\text {OLED}}$ ) at high temperatures. To achieve a pure black image, the anode of each OLED is actively discharged during the reset period to release the accumulated charge. The feasibility of the proposed circuit is evaluated using TFT models that were developed from experimental data on 1.28-in display panels. Analytical results reveal that the relative current error rates are below 5.87% and 5.45% at $25~^{\circ }$ C and $85~^{\circ }$ C, respectively, with a ±0.3 V change in the threshold voltage ( ${V}_{\text {TH}}$ ) of p-type D-TFT. At $85~^{\circ }$ C, ${I}_{\text {OLED}}$ s maintain low current deviation rates at different gray levels during a prolonged emission period of 1 s, demonstrating the high feasibility of using the proposed circuit for low-frame-rate operation of AMOLED displays.