We analyze the uncertainty of the coefficient of band-to-band absorption of crystalline silicon. For this purpose, we determine the absorption coefficient at room temperature (295 K) in the wavelength range from 250 to 1450 nm using four different measurement methods. The data presented in this work derive from spectroscopic ellipsometry, measurements of reflectance and transmittance, spectrally resolved luminescence measurements and spectral responsivity measurements. A systematic measurement uncertainty analysis based on the Guide to the expression of uncertainty in measurement (GUM) as well as an extensive characterization of the measurement setups are carried out for all methods. We determine relative uncertainties of the absorption coefficient of 0.4% at 250 nm, 11% at 600 nm, 1.4% at 1000 nm, 12% at 1200 nm and 180% at 1450 nm. The data are consolidated by intercomparison of results obtained at different institutions and using different measurement approaches.
We measure and discuss the complex refractive index of conventional ethylene vinyl acetate (EVA) and an EVA with enhanced UV-transmission based on spectroscopic ellipsometry, transmission and reflection measurements over the wavelength range from 300-1200 nm. Ray tracing of entire solar cell modules using this optical data predicts a 1.3% increase in short circuit current density (Jsc) at standard test conditions for EVA with enhanced UV transmission. This is in good agreement with laboratory experiments of test modules that result in a 1.4% increase in Jsc by using a UV transparent instead of a conventional EVA. Further, ray tracing simulations with realistic irradiation conditions with respect to angular and spectral distribution reveal an even larger Jsc increase of 1.9% in the yearly average. This increase is largest in the summer months with an increase of up to 2.3%
It is well known that the absorbance of soda-lime glass is very sensitive to the amount of iron contamination; therefore, it strongly affects the power output of mass-produced crystalline silicon solar cell modules. We use a combination of ellipsometry and transmission measurements to determine the optical constants, at wavelengths between 300 and 1690 nm, of soda-lime-silica glasses containing an iron content between 1 0 / 00 . and 0.01 0 / 00 ., measured with inductive coupled plasma optical emission spectroscopy. We derive two different semiempirical models for the extinction coefficient of soda-lime-silica glass as a function of its iron content: one model for iron alone and the other model for iron including other typical remaining coloring agents. Furthermore, we use ray tracing and spice simulations to predict the power losses in standard modules as a function of iron content in their cover glass sheet. Considering a module with 3.2-mm glass thickness, our results predict a decline in module output power due to iron content in the glass of 1.1% (3 W) for Fe 2 O 3 = 0.1 0 / 00 . and 9.8% (28 W) for Fe 2 O 3 = 1 0 / 00.
1 March 2017 in Progress in Photovoltaics: Research and Applications
While ray tracing of solar cells was established decades ago, ray tracing of entire modules has met obstacles, mainly because module optics are affected by geometric structures varying over a large scale of dimensions. In this paper, we introduce a ray tracing framework that is based on a modular structure made up of separate plugins. While existing plugins can be used for common effects such as light sources, absorption in materials, etc., specialized plug-ins can be written by users to handle problem-specific properties. We demonstrate the functionality of our approach by ray tracing a test module containing 9 crystalline Si solar cells. Good agreement between light-beam induced current (LBIC) measurements and ray tracing is achieved