21 April 2025 in IEEE Transactions on Instrumentation and Measurement
The actual underwater acoustic field environment is subject to various interferences, resulting in high background noise, thereby complicating underwater target detection. Some traditional subspace direction-of-arrival (DOA) estimation algorithms often require prior knowledge of the number of sources, leading to performance degradation if the number of sources is estimated inaccurately. With advancements in sensor technology, scholars have developed acoustic vector sensors (AVS). However, some traditional algorithms applied directly to AVS result in degraded performance of the algorithm. To address these challenges, we propose a DOA estimation algorithm that is independent of the number of sources and is applicable to AVS. This is achieved by constructing the generalized minimum variance distortionless response (G-MVDR) model based on AVS and exploring the eigenvalue ordering principle under the G-MVDR framework. It provides high-resolution DOA results independent of the number of sources and can be flexibly applied to AVS arrays. The proposed algorithm is analyzed with respect to eigenvalue ranking, and the optimal threshold is determined. Finally, the accuracy and effectiveness of the proposed algorithm are validated through simulations and experiments.
1 December 2025 in IEEE Transactions on Aerospace and Electronic Systems
Conventional differential directivity algorithms are highly dependent on array configuration, especially when designing steerable differential beamformers. To this end, we proposed a method for designing fully steerable directional differential beamformer based on acoustic vector sensor (AVS) with arbitrary planar array. This method addresses the challenges posed by the limited size of small platforms, strict constraints on array configuration, and weak detection capability, thereby enabling fully steerable beamforming detection using small-sized arbitrary planar geometry AVS array (APG-AVSA). The Nth-order differential beamformer is implemented by obtaining individual channel weight vectors, which cause the steering vector to converge to the target beampattern through Jacobi-Anger expansion (JAE). The major advantages of this approach are as follows: 1) a fully steerable differential beamformer design method based on APG-AVSA, which overcomes the limitations of array geometry on the performance of steerable differential beamformer, is proposed and a closed-form solution for Nth-order beamformer is provided, and 2) a theoretical derivation of the first-order white noise gain (WNG) of the proposed algorithm is given, demonstrating the proposed algorithm overcomes the problem of white noise amplification inherent in conventional differential directional algorithms. Finally, the performance of the proposed algorithm was verified through simulation comparisons and external experimental data.
1 January 2025 in IEEE Transactions on Instrumentation and Measurement
Differential line arrays (DLAs) hold significant potential for practical signal enhancement, but DLAs are not capable of realizing the Nth-order fully steerable function. To overcome this problem, this paper introduces a novel fully steerable differential beampattern with controllable nulls to address the limited steering capability of conventional differential beamformers based on linear arrays, which enables asymmetric beampattern design. The proposed differential beamformer is implemented through McLaughlin series expansion to approximate the constructed target beampattern and establishes the relationship between controllable nulls and the weights of beamformer, thereby enforcing the null constraint. The main contributions of this paper are as follows: 1) A fully steerable differential beamforming design method is proposed, which not only achieves the Nth-order fully steerable function but also enables more controllable interference suppression; 2) Validated through simulation comparisons, the proposed method based on linear acoustic vector sensor arrays (LAVSAs) mitigates the limitation of conventional linear arrays, which fail to achieve the Nth-order fully steerable function, and exhibits superior directivity factor performance. Finally, the effectiveness of the proposed method is demonstrated by experimental results.
1 November 2025 in The Journal of the Acoustical Society of America
In order to solve the degradation of the performance of the steerable differential beamforming based on Maclaurin series expansion (MSE), a differential beamforming design for linear acoustic vector sensor arrays based on Jacobi–Anger expansion (JAE) is proposed. First, JAE is combined with Chebyshev polynomial to construct the higher-order steerable directional differential beampattern, and a closed-form solution for the JAE-based differential beamformer is realized. Second, the theoretical link between MSE and JAE is established, demonstrating that the truncated error in MSE is the cause of performance degradation in MSE-based method. Furthermore, the factors affecting the white noise gain of the proposed method are analyzed and simulations demonstrate that the proposed method outperforms alternative methods at the same truncation order. Finally, the effectiveness of the proposed method is further verified by a sea experiment.
16 June 2026 in Ocean Engineering
1 January 2026 in IEEE Transactions on Instrumentation and Measurement
Multistage differential beamforming has attracted considerable attention for the ability to achieve high spatial gain while maintaining robustness. However, the spatial response of multistage differential beamforming varies with frequency. In order to overcome this limitation, this paper proposes a two-stage differential beamforming for acoustic vector sensor (AVS) planar arrays. Each AVS consists of a sound pressure sensor and two orthogonal particle velocity sensors oriented along the x-axis and y-axis, respectively. In the initial stage, pre-beamforming is performed to maintain uniform differential directivity across all AVSs. The array obtained through pre-beamforming is treated as a virtual array. The steering vector of the virtual array is expanded using the Jacobi-Anger expansion and circular harmonic decomposition, and then compared with the ideal differential beampattern to achieve a frequency-invariant beampattern design. The primary contributions of this paper are as follows: 1) A frequency-invariant two-stage differential beamforming method is proposed, which achieves a maximum WNG improvement of 4.8 dB, attributed to the frequency-independent directivity of the AVSs during pre-beamforming. 2) Simulation results demonstrate that the proposed method exhibits adequate robustness and achieves superior directivity gain. Finally, the effectiveness of the proposed method is validated through first-order and second-order differential beamforming using experimental data collected from a cross-shaped array consisting of five AVSs at a sampling rate of 8 kHz.