23 April 2014 in IEEE Photonics Journal
The broadband parasitic amplification in a diode-seeded nanosecond ytterbium-doped fiber laser amplifier system is numerically and experimentally investigated. The amplification is originated from a weak and pulsed parasitic signal associated with the 1064-nm seed diode laser. Although the average power of the parasitic pulse is less than 5% of the total seed laser power, a significant transient spike is observed during the amplification. In agreement with the simulation, nonlinear effects caused by the transient spike limits the scaling of signal peak power in fiber preamplifiers. With the utilization of a narrow bandwidth filter to eliminate the parasitic pulse, the power and energy scalability of a multistage diode-seeded fiber amplifier laser system has been significantly improved. At 1064 nm, pulses with the peak power of 120 kW and energy of 1.2 mJ have been successfully generated in the multistage Yb 3+ -doped fiber amplifier with an energy gain of 63 dB and 56% conversion efficiency. In viewing of the parasitic pulse's 8.8-nm bandwidth, it has the potential to become a novel seed source for high-peak-power fiber amplifiers.
1 February 2020 in Building and Environment
19 November 2021 in Scientific Reports
This paper proposes an investigating SARS-CoV-2 inactivation on surfaces with UV-C LED irradiation using our in-house-developed ray-tracing simulator. The results are benchmarked with experiments and Zemax OpticStudio commercial software simulation to demonstrate our simulator's easy accessibility and high reliability. The tool can input the radiant profile of the flexible LED source and accurately yield the irradiance distribution emitted from an LED-based system in 3D environments. The UV-C operating space can be divided into the safe, buffer, and germicidal zones for setting up a UV-C LED system. Based on the published measurement data, the level of SARS-CoV-2 inactivation has been defined as a function of UV-C irradiation. A realistic case of public space, i.e., a food court in Singapore, has been numerically investigated to demonstrate the relative impact of environmental UV-C attenuation on the SARS-CoV-2 inactivation. We optimise a specific UV-C LED germicidal system and its corresponding exposure time according to the simulation results. These ray-tracing-based simulations provide a useful guideline for safe deployment and efficient design for germicidal UV-C LED technology.
1 December 2014 in Physics of Plasmas
Numerical thermalization in collisional one-dimensional (1D) electrostatic (ES) particle-in-cell (PIC) simulations was investigated. Two collision models, the pitch-angle scattering of electrons by the stationary ion background and large-angle collisions between the electrons and the neutral background, were included in the PIC simulation using Monte-Carlo methods. The numerical results show that the thermalization times in both models were considerably reduced by the additional Monte-Carlo collisions as demonstrated by comparisons with Turner's previous simulation results based on a head-on collision model [M. M. Turner, Phys. Plasmas 13, 033506 (2006)]. However, the breakdown of Dawson's scaling law in the collisional 1D ES PIC simulation is more complicated than that was observed by Turner, and the revised scaling law of the numerical thermalization time with numerical parameters are derived on the basis of the simulation results obtained in this study.
5 March 2014 in Laser Physics