In recent years, the IoT has emerged as the most promising technology in the key evolution of industry 4.0/industry 5.0, smart home automation (SHA), smart cities, energy savings and many other areas of wireless communication. There is a massively growing number of static and mobile IoT devices with a diversified range of speed and bandwidth, along with a growing demand for high data rates, which makes the network denser and more complicated. In this context, the next-generation communication technology, i.e., sixth generation (6G), is trying to build up the base to meet the imperative need of future network deployment. This article adopts the vision for 6G IoT systems and proposes an IoT-based real-time location monitoring system using Bluetooth Low Energy (BLE) for underground communication applications. An application-based analysis of industrial positioning systems is also presented.
Static Random Access Memory (SRAM) is one of the most crucial and critical memory devices used in today's technological environment. The continuous scaling of CMOS technology significantly limits the performance of 6T SRAM cell in terms of leakage power and stability. With remote chances to further improve the MOSFET technology in future, Carbon Nanotube Field Effect Transistors (CNTFETs) are being widely studied as the possible alternatives. In this paper, the conventional 6T SRAM cell is compared with CNTFET based SRAM cell. The conventional 6T SRAM cell is designed using Cadence Virtuoso Tool in 180nm and 45nm Technology. The Verilog-A code of CNTFET for replacing nMOS and pMOS are separately simulated in Cadence Virtuoso Tool. The CNTFET based SRAM cell is technology independent. The performances are evaluated in terms of leakage power, delay and stability to show that the CNTFET based SRAM cell can successfully replace the CMOS based SRAM cell.
16 March 2018 in ECS Journal of Solid State Science and Technology
The work explores the performance estimation of Inverted ‘T’ (IT) architecture with JL topology i.e (ITJL-FinFET, the device utilizes unwanted area among multi-fins with bulk conduction mechanism) on SOI platform. For the first time, the crucial performance metrics of ITJL FinFET are debated extensively by varying the geometry dimensions at 22-nm node. The gate length (LG), virtual underlap source (LUS) and drain (LUD), and workfunction (ϕM) are optimized at 20-nm, 4-nm, 4.6 eV respectively. The SS, DIBL and switching current ratio (ION/IOFF) are achieved 69 mV/decade, 27 mV/V and 105. The decrement in transconductance (gm) with increasing in length of LG, LUS, LUD and simultaniously, transconductance generation factor (TGF) tends to improve. Moreover, we have been examine the grid sensitivity of the device and considered the grid points where the independency of I-V characteristics achieved during simulation. The result ensures a systematic prefabrication analysis of ITJL FinFET found to be appropriate, which will overcome the challenges at the nanoscale regime.