Thin film composite (TFC) nanofiltration (NF) membranes typically used for drinking water treatment applications are susceptible to fouling by natural organic matter (NOM) which adversely affects the permeation and separation efficacy. Here, new thin film nanocomposite (TFN) NF membranes were fabricated through the incorporation of amine functionalized-boron nitride, BN(NH2), nanosheets within the polypiperazine amide (PPA) active layer during the interfacial polymerization (IP) process to improve the fouling resistance of membranes. Physical and chemical characterization investigations confirmed the successful embedment of nanosheets within the PPA network and revealed changes in the membrane surface morphology and chemistry as a result of BN(NH2) addition. Accordingly, the membrane containing 0.004 wt% of BN(NH2) nanosheets (PPA-BN-4) exhibited a more negatively charged and hydrophilic surface compared with a bare PPA membrane, both prepared under similar experimental conditions. These characteristics correlated well with 13.4% enhancement in permeation of the PPA-BN-4 membrane without significantly compromising the NOM rejection in terms of ultraviolet absorbance at 254 nm (UV254) and dissolved organic carbon (DOC). The normalized flux also retained a very high value at 0.97 during the filtration of moderately-concentrated humic acid (HA) solutions which confirms the excellent fouling resistance behaviour of the PPA-BN-4 membrane. The highly reproducible results achieved in this study indicate the great potential of BN(NH2) TFN membranes in practical drinking water treatment applications.
1 August 2009 in Separation and Purification Technology
Although commercial membranes are well established materials for water desalination and wastewater treatment, modification on commercial membranes is still necessary to deliver high-performance with enhanced flux and/or selectivity and fouling resistance. A modification method with plasma techniques has been extensively applied for high-performance membrane production. The paper presents a mechanistic review on the impact of plasma gas and polymerization, at either low pressure or atmospheric pressure on the material properties and performance of the modified membranes. At first, plasma conditions at low-pressure such as plasma power, gas or monomer flow rate, reactor pressure, and treatment duration which affect the chemical structure, surface hydrophilicity, morphology, as well as performance of the membranes have been discussed. The underlying mechanisms of plasma gas and polymerization have been highlighted. Thereafter, the recent research in plasma techniques toward membrane modification at atmospheric environment has been critically evaluated. The research focuses of future plasma-related membrane modification, and fabrication studies have been predicted to closely relate with the implementation of the atmospheric-pressure processes at the large-scale.