20 March 2024 in Matter and Radiation at Extremes
The discovery of chirped pulse amplification has led to great improvements in laser technology, enabling energetic laser beams to be compressed to pulse durations of tens of femtoseconds and focused to a few micrometers. Protons with energies of tens of MeV can be accelerated using, for instance, target normal sheath acceleration and focused on secondary targets. Under such conditions, nuclear reactions can occur, with the production of radioisotopes suitable for medical application. The use of high-repetition lasers to produce such isotopes is competitive with conventional methods mostly based on accelerators. In this paper, we study the production of 67Cu, 63Zn, 18F, and 11C, which are currently used in positron emission tomography and other applications. At the same time, we study the reactions 10B(p,α)7Be and 70Zn(p,4n)67Ga to put further constraints on the proton distributions at different angles, as well as the reaction 11B(p,α)8Be relevant for energy production. The experiment was performed at the 1 PW laser facility at Vega III in Salamanca, Spain. Angular distributions of radioisotopes in the forward (with respect to the laser direction) and backward directions were measured using a high purity germanium detector. Our results are in reasonable agreement with numerical estimates obtained following the approach of Kimura and Bonasera [Nucl. Instrum. Methods Phys. Res., Sect. A 637, 164–170 (2011)].
1 December 2008 in IEEE Transactions on Nuclear Science
We applied the digital pulse shape acquisition to the read out of the anode pads of the focal plane detector of the MAGNEX spectrometer in order to measure the position coordinates using digital signal processing.
28 April 2025 in Matter and Radiation at Extremes
Driving of the nuclear fusion reaction p + 11B → 3α + 8.7 MeV under laboratory conditions by interaction between high-power laser pulses and matter has become a popular field of research, owing to its numerous potential applications: as an alternative to deuterium–tritium for fusion energy production, astrophysics studies, and alpha-particle generation for medical treatment. One possible scheme for laser-driven p–11B reactions is to direct a beam of laser-accelerated protons onto a boron (B) sample (the so-called “pitcher-catcher” scheme). This technique has been successfully implemented on large high-energy lasers, yielding hundreds of joules per shot at low repetition. We present here a complementary approach, exploiting the high repetition rate of the VEGA III petawatt laser at CLPU (Spain), aiming at accumulating results from many interactions at much lower energy, to provide better control of the parameters and the statistics of the measurements. Despite a moderate energy per pulse, our experiment allowed exploration of the laser-driven fusion process with tens (up to hundreds) of laser shots. The experiment provided a clear signature of the reactions involved and of the fusion products, accumulated over many shots, leading to an improved optimization of the diagnostics for experimental campaigns of this type. In this paper, we discuss the effectiveness of laser-driven p–11B fusion in the pitcher–catcher scheme, at a high repetition rate, addressing the challenges of this experimental scheme and highlighting its critical aspects. Our proposed methodology allows evaluation of the performance of this scheme for laser-driven alpha particle production and can be adapted to high-repetition-rate laser facilities with higher energy and intensity.
1 January 2015 in AIP Conference Proceedings
5 January 2021 in Physical Review C
Albergo thermometers with double isotope, isotone, and isobar yield ratio pairs with one proton and/or neutron difference are investigated. Without any extra sequential decay correction, a real temperature value of MeV is deduced from the yields of the experimentally reconstructed primary hot intermediate mass fragments (IMFs) from collisions at 40 MeV/nucleon using the Albergo thermometer for the first time. An experimental sequential decay correction from the apparent temperatures to the real ones for 12 other reaction systems with different neutron-proton () asymmetries in the same experiment, , on , , , and at 40 MeV/nucleon, is performed using an empirical correction factor approach of Tsang et al. [ Phys. Rev. Lett. 78, 3836 (1997)] with the deduced 4.9-MeV temperature value. The dependence of nuclear temperature on the source asymmetry is further investigated using these deduced real source temperature values from the present 13 systems. It is found that the deduced real source temperatures at the present source range show a rather weak dependence on the source asymmetry. By comparison between our previous results and those from other independent experiments, a consistent description for the asymmetry dependence of nuclear temperature is addressed.
10 September 2021 in EPJ Web of Conferences
The inverse kinematics methodology using a gas target has been applied to produce medically important radionuclides at the Cyclotron Institute at Texas A&M University. The production of the theranostic radionuclide 67Cu (T1/2 = 62 h) through the reaction of a 70Zn beam at 15 MeV/nucleon with a hydrogen gas target was performed. The activities at end of irradiation and the thick target yield were obtained for 67Cu. A test using the forward-focused neutrons from the primary reaction to irradiate natZn to produce 67Cu is also presented.