GEMMA-Group of Environmental Engineering and Microbiology. Department of Civil and Environmental Engineering. Escola d’Enginyeria de Barcelona Est (EEBE). Universitat Politècnica de Catalunya-BarcelonaTech. Av
Auto-generated profile, based on publicly available information
Artai Lage
GEMMA-Group of Environmental Engineering and Microbiology. Department of Civil and Environmental Engineering. Escola d’Enginyeria de Barcelona Est (EEBE). Universitat Politècnica de Catalunya-BarcelonaTech. Av
Seven photosynthethic microbiomes were collected from field environmental samples to test their potential in polyhydroxybutirate (PHB) and exopolysaccharides (EPS) production, two alternatives to chemical-based polymers. Microscope observations together with microbial sequence analysis revealed the microbiome enrichment in cyanobacteria after culture growth under phosphorus limitation. PHB and EPS production were studied under three culture factors (phototrophy, mixotrophy and heterotrophy) by evaluating and optimizing the effect of three parameters (organic and inorganic carbon and days under light:dark cycles) by Box-Behnken design. Results showed that optimal conditions for both biopolymers synthesis were microbiome-dependent; however, the addition of organic carbon boosted PHB production in all the tested microbiomes, producing up to 14% dcw PHB with the addition of 1.2 g acetate·L -1 and seven days under light:dark photoperiods. The highest EPS production was 59 mg·L -1 with the addition of 1.2 g acetate·L -1 and four days under light:dark photoperiods. The methodology used in this article is suitable for enriching microbiomes in cyanobacteria, and for testing the best conditions for bioproducts synthesis for further scale up.
Polyhydroxybutyrate (PHB) production was enhanced through a decoupled two-reactor system that separated photoautotrophic biomass growth from polymer synthesis in a cyanobacteria-dominated microbiome composed primarily by Synechocystis sp., Leptolyngbya sp, and Synechococcus sp. Biomass was cultivated autotrophically in 3 L semi-continuous photobioreactors over 120 days, achieving high kinetic performance and superior nutrient conversion efficiency compared to standard laboratory strains (average rx= 87 mgVSS⋅L-1⋅d-1 and YX/N=13.6 mgVSS·mgN-1). Harvested biomass was subsequently transferred to a different reactor for PHB accumulation. The operational parameters that were evaluated during polymer accumulation were: (i) dissolved oxygen, (ii) acetate feeding strategy, and (iii) temperature. Anoxic conditions were found to be essential for substantial PHB synthesis. Replacing daily acetate pulses (100 mg·L-1) with a single high-concentration feed (600 mg·L-1) improved PHB content up to 14% of dry cell weight (dcw). Further optimization through temperature control at approximately 27 °C elevated polymer accumulation to 26 %dcw. Under these optimized conditions, the system achieved an average volumetric productivity of 22.9 mg PHB·L⁻¹·d⁻¹, representing an 18-fold increase over initial baseline conditions. This decoupled configuration eliminates the downtime inherent to sequential batch systems that alternate growth and accumulation in the same reactor. Moreover, this configuration enables independent optimization of growth and accumulation phases. This study demonstrates the potential of microbiome-based systems for efficient biopolymer production.
Polyhydroxybutyrate (PHB) production was enhanced through a decoupled two-reactor system that separated photoautotrophic biomass growth from polymer synthesis in a cyanobacteria-dominated microbiome composed primarily by Synechocystis sp., Leptolyngbya sp, and Synechococcus sp. Biomass was cultivated autotrophically in 3 L semi-continuous photobioreactors over 120 days, achieving high kinetic performance and superior nutrient conversion efficiency compared to standard laboratory strains (average rx= 87 mgVSS⋅L-1⋅d-1 and YX/N=13.6 mgVSS·mgN-1). Harvested biomass was subsequently transferred to a different reactor for PHB accumulation. The operational parameters that were evaluated during polymer accumulation were: (i) dissolved oxygen, (ii) acetate feeding strategy, and (iii) temperature. Anoxic conditions were found to be essential for substantial PHB synthesis. Replacing daily acetate pulses (100 mg·L-1) with a single high-concentration feed (600 mg·L-1) improved PHB content up to 14% of dry cell weight (dcw). Futher optimization through temperature control at approximately 27 °C elevated polymer accumulation to 26% dcw. Under these optimized conditions, the system achieved an average volumetric productivity of 22.9 mg PHB·L⁻¹·d⁻¹, representing an 18-fold increase over initial baseline conditions. This decoupled configuration eliminates the downtime inherent to sequential batch systems that alternate growth and accumulation in the same reactor. Moreover, this configuration enables independent optimization of growth and accumulation phases. This study demonstrates the potential of microbiome-based systems for efficient biopolymer production.
The aim of this study was to set the operating mode in regards to nutrients, temperature and light to use as a strategy to enrich a microbiome rich in cyanobacteria in polyhidroxybutyrate (PHB)-producers in order to enhance this biopolymer production. Alternate growth and accumulation phases were conducted for 179 days in a 3 L photobioreactor. Although, presence of green microalgae potentially reduced PHB production, the microbiome produced up to 22 % dry cell weight (dcw) PHB. Results suggested that this methodology could be applied to a robust microbiome rich in cyanobacteria to boost PHB production.