24 October 2025 in IEEE Transactions on Aerospace and Electronic Systems
3-D reconstruction and motion estimation of space targets are crucial for space situational awareness (SSA). Inverse synthetic aperture radar (ISAR) is one of the primary observation techniques for SSA. Traditional single-station ISAR methods, however, are unable to effectively reconstruct non-stationary targets because their unknown intrinsic motion prevents the determination of the correct projection geometry. To address this, this paper proposes an algorithm for instantaneous 3-D reconstruction and motion estimation using a distributed ISAR system. Our method leverages multi-view images acquired in a single time snapshot to resolve the inherent ambiguity between the target's structure and its motion. The core of our contribution is a joint optimization framework that simultaneously estimates the target's 3-D point cloud structure and its instantaneous intrinsic rotation parameters, including the rotation axis and angular velocity. This is achieved by using the consistency of multi-view silhouettes as the optimization objective, which is efficiently solved by particle swarm optimization (PSO). Extensive simulations validate that the proposed method rapidly reconstructs dense 3-D point clouds of non-stationary targets while accurately estimating their motion and pose.
19 January 2026 in IEEE Transactions on Computational Imaging
Effective and accurate translational motion compensation is crucial for inverse synthetic aperture radar (ISAR) imaging. Traditional data-based translational motion compensation methods are inapplicable to uniformly accelerated targets in low signal-to-noise ratio (SNR) scenarios. In this paper, a parametric approach is proposed based on joint modified phase difference and two-step least squares (MPD-TSLS). The method employs a second-order polynomial model for translational motion, whereby the energy of all scatterers is converted to a single range and Doppler cell through MPD operation, respectively. The estimated acceleration and velocity are then obtained by TSLS. To enhance precision, an optimization approach based on LS for refining polynomial parameters is also employed. The proposed method achieves a substantial increase in SNR, ensuring precise compensation accuracy while maintaining high computational efficiency by relying exclusively on fast Fourier transform (FFT) and matrix operations. The experimental results obtained from both simulated and real datasets fully verify that the proposed method exhibits superior performance compared with the other implemented methods.
11 April 2025 in Signal Processing
11 November 2025 in IEEE Transactions on Antennas and Propagation
Bistatic inverse synthetic aperture radar (B-ISAR) has garnered significant attention for its ability to collect target echo data from different observation views and to address monostatic-ISAR device’s inherent constraints. However, the unique time-varying bistatic angle (TBA) is coupled with the rotation of the target, the migration through the resolution cell (MTRC) of scattering points becomes more severe and decreases the B-ISAR image quality. Meanwhile, the geometric distortion caused by the TBA leads to target deformation in the final B-ISAR image. In this paper, a signal model for moving targets under the bistatic configuration is developed, explicitly incorporating the TBA. The effects of MTRC and geometric distortion on B-ISAR imaging are thoroughly analyzed. Furthermore, the impact of distortion coefficient estimation errors on geometric correction is investigated, and the tolerance range of TBA estimation errors is quantitatively analyzed. Then, a dual generalized keystone transform and fractional Fourier transform (DGKT-FrFT) method is employed in the echo domain to eliminate the high-order MTRC. Considering the distortion term, directly applying fast Fourier transform (FFT) in azimuth dimension will fail to achieve a high-quality B-ISAR image. To correct the geometric distortion, the distortion coefficient is estimated by location information added non-linear square algorithm (LINLSA). The proposed method can succeed in obtaining focused and undistorted images. Experimental results confirm the proposed method’s effectiveness.