8 September 2021 in IEEE Transactions on Control Systems Technology
In this article, a new learning-based time-varying impedance controller is proposed and tested to facilitate an autonomous physical human–robot interaction (pHRI). Novel adaptation laws are formulated for online adjustment of robot impedance based on human behavior. Two other sets of update rules are defined for intelligent coping with the robot’s structured and unstructured uncertainties. These rules ensure stability via Lyapunov’s theorem and provide uniform ultimate boundedness (UUB) of the closed-loop system’s response, without a need for HRI force/torque measurement. Accordingly, the convergence of response signals, including errors in tracking, online impedance learning, robot parameter adaptation, and controller gain variation, is proven to operate in a bounded region (compact set) in the presence of robot and human uncertainties and bounded disturbances. The performance of the developed intelligent impedance-varying control strategy is investigated through comprehensive experimental studies in a repetitive following task with a moving target.
30 March 2022 in IEEE Transactions on Control Systems Technology
Executing safe brachiation maneuvers with a cable-suspended underactuated robot is a challenging problem due to the complications induced by the cable dynamics. We present and experimentally implement an online adaptive controller for a wire-borne brachiating robot swinging on a vibrating cable. An adaptive function approximation approach is proposed to estimate the unknown dynamics of the flexible cable as an external force applied to the robot. Robust control Lyapunov and barrier functions are designed and incorporated into quadratic programs to synthesize a unified adaptive control framework, which formally guarantees the stability and safety of the brachiating robot in the presence of dynamic uncertainties, actuator constraints, and obstacles in the environment. The stability analysis and derivation of the adaptation law are carried out through a Lyapunov analysis. We demonstrate and validate the proposed control framework using extensive hardware experiments with an underactuated brachiating robot operating on a flexible cable. Simulation results, hardware experiments, and comparisons with a baseline controller show that the proposed quadratic programming-based controller achieves reliable tracking performance and disturbance estimation in the presence of model uncertainties, actuator limits, and safety constraints.
3 November 2022 in IEEE Transactions on Control Systems Technology
This article formulates and solves a multiobjective fast charging-minimum degradation optimal control problem (OCP) for a lithium-ion battery module made of series-connected cells equipped with an active balancing circuitry. The cells in the module are subject to heterogeneity induced by manufacturing defects and nonuniform operating conditions. Each cell is expressed via a coupled nonlinear electrochemical, thermal, and aging model and the direct collocation approach is employed to transcribe the OCP into a nonlinear programming problem (NLP). The proposed OCP is formulated under two different schemes of charging operation: 1) same charging time (OCP-SCT) and 2) different charging time (OCP-DCT). The former assumes simultaneous charging of all cells irrespective of their initial conditions, whereas the latter allows for different charging times of the cells to account for heterogeneous initial conditions. The problem is solved for a module with two series-connected cells with intrinsic heterogeneity among them in terms of state of charge and state of health. Results show that the OCP-DCT scheme provides more flexibility to deal with heterogeneity, boasting of lower temperature increase, charging current amplitudes, and degradation. Finally, a comparison with the common practice of constant current (CC) charging over a long-term cycling operation shows that promising savings, in terms of retained capacity, are attainable under both control (OCP-SCT and OCP-DCT) schemes.
1 June 2021 in Journal of Process Control
16 June 2022 in International Journal of Robust and Nonlinear Control
19 July 2022 in Journal of Dynamic Systems, Measurement, and Control
Riccati equation-based control approaches such as linear-quadratic regulator (LQR) and time-varying LQR (TVLQR) are among the most common methods for stabilizing linear and nonlinear systems, especially in the context of optimal control. However, model inaccuracies may degrade the performance of closed-loop systems under such controllers. To mitigate this issue, this paper extends and encompasses Riccati-equation based controllers through the development of a robust stabilizing control methodology for uncertain nonlinear systems with modeling errors. We begin by linearizing the nonlinear system around a nominal trajectory to obtain a time-varying linear system with uncertainty in the system matrix. We propose a modified version of the continuous differential Riccati equation (MCDRE), whose solution is updated based upon the estimates of model uncertainty. An optimal least squares (OLS) algorithm is presented to identify this uncertainty and inform the MCDRE to update the control gains. The unification of MCDRE and OLS yields a robust time-varying Riccati-based (RTVR) controller that stabilizes uncertain nonlinear systems without the knowledge of the structure of the system's uncertainty a priori. The convergence of the system states is formally proven using a Lyapunov argument. Simulations and comparisons to the baseline backward-in-time Riccati-based controller on two real-world examples verify the benefits of our proposed control method.