25 June 2021 in IEEE Access
Two-dimensional (2D) arrays are fundamental to localization applications. Specifically, sparse arrays can provide superior direction-of-arrival (DoA) estimation performance with limited number of sensors. There has been increased interest in the research community in designing 2D sparse arrays with performance improvement and complexity reduction. The research efforts are uncoordinated resulting in some repetitions and sometimes conflicting claims. After introducing 2D sparse arrays and their importance, this paper establishes the 2D-DoA estimation model and consolidates the performance metrics. An extensive literature overview of sparse arrays for 2D-DoA estimation is presented with an attempt to categorize existing works. The examined arrays include parallel arrays, L-shaped, V-shaped, hourglass, thermos, nested planer, and coprime planner, to name a few. Existing designs are compared in terms of required number of sensors, degrees of freedom (DOF), algorithm used, associated complexity and aperture size. The focus is on describing the sparse arrays, yet some specific details on DoA estimation algorithms are provided for selected array geometries. Fundamental problems of 2D-DoA estimation are outlined and existing solutions to alleviate these problems are discussed. This should be useful in predicting the estimation performance and required complexity; thus, aiding the decision of selecting a sensor geometry for DoA estimation. This review serves as a starting point for researchers interested in exploring or designing new 2D sparse arrays. It also helps to identify the gaps in the field and avoids unnecessary minor design modifications.
31 January 2024 in IEEE Open Journal of Antennas and Propagation
To have uninterrupted wireless connectivity, higher throughput, and latency rate down to nanoseconds; future networks will rely heavily on higher frequency bands, yet these signals suffer from attenuation and can be easily blocked by objects. Hence, those signals lose strength over longer distances significantly compared to their low-frequency counterparts. To overcome these constraints, reconfigurable intelligent surfaces (RIS) can increase the wireless network capacity and coverage by consciously altering the wireless propagation environment, which makes them one of the key enablers of the 6G communication networks. The potential benefits of RIS-assisted communication systems can be effectively increased using machine learning (ML) to pave the path towards Wireless 2.0, having a vision of digitization, programmability, and intelligence. This paper reviews recent developments in RIS technology with a special emphasis on tuning techniques, hardware concepts, RIS empowered by artificial intelligence techniques, and applications for next generation of networks. Finally, a viewpoint on the difficulties and potential directions of intelligent metasurfaces are also presented.
30 November 2020 in IEEE Journal of Radio Frequency Identification
This work demonstrates the ability to extend the positioning range of low-powered RFID tags to distances usually not achievable with other wireless or conventional RFID technologies. The technique is performed through a Received Signal Phase (RSP)-based method on a 5.8 GHz backscatter tunneling tag, in multipath-rich indoor and outdoor environments, at distances up to 35 meters from the reader. Distance errors as low as 0.1% of the total reader-to-tag distance were observed with average errors of 0.8% and 0.6% for indoor and outdoor environments, respectively. Compared to Received Signal Strength (RSS)-based techniques, the average distance estimation accuracy is improved by a factor of 51 and 38 for indoor and outdoor environments, respectively. Moreover, an Effective Isotropic Radiated Power (EIRP) of only 10.5 dBm and a biasing power for the tunneling tag of only 21.3 μW at 80 mV promise a low-power, long-range sub-meter scale positioning technique with a projected maximum range over 1 km.
11 September 2019 in IEEE Transactions on Wireless Communications
The round-trip nature of backscatter communications subjects the radio link to unusually severe small-scale fading. Over fading channels, the received signal envelope in backscatter-based systems such as radio-frequency identification (RFID) systems fades worse than a standard one-way communication. In this paper, we study spatial fading of the received signal envelope in an important class of backscatter systems using retrodirective transponders that allow microwave and mm-wave communications at extraordinarily low-power consumption by an RF tag. Our comparative study shows that the use of retrodirective RF tags changes the backscatter channel statistics from being doubly faded to singly faded, resembling a conventional, one-way radio channel. Surprisingly, fading in retrodirective backscatter channels is highly varied and sensitive to the fine structure of the diffuse multipath waves in the radio environment in ways that fading in conventional radio links are not.
29 November 2018 in IEEE Journal of Radio Frequency Identification
Movement towards mm-wave backscatter communications in radio-frequency identification (RFID) systems necessitates seeking designs that compensate for the path loss introduced by the radio channel. A viable, simple, and power-efficient solution is to equip RFID tags with retrodirective arrays, which guarantee reflection with maximal gain in the direction of incidence. In this paper, we build upon a previous work to design and implement an original retrodirective tag in which its feeding network is a properly-terminated rat-race coupler. We start by deriving the required terminations that ensure retrodirectivity. Then, we build a retrodirective tag and experimentally compare its radar cross section to that of a single-antenna tag. The measurements reveal that the radar cross section of the proposed retrodirective tag is, on average, approximately 6 dB more than that of a single-antenna tag while both tags have the same field-of-view. From the promising results in this paper, the proposed design is a potential candidate for next-generation microwave and mm-wave RFID tags because it is compatible with low-power reflection amplifiers (e.g., tunnel diodes), it can implement multiple modulation schemes without changing the circuit layout, and it can be implemented using only a single RF switch.
18 January 2023 in IEEE Access
The growing interest in backscatter communications as a low-powered solution in various fields necessitates pushing the envelope of current backscatter systems in multiple frontiers, among which is spectral efficiency. The increase in spectral efficiency can drive real-time applications such as augmented reality. In most of backscatter-system applications such as radio-frequency identification, backscatter modulation is implemented using binary schemes realized with square pulses, which are not spectral efficient. To address the spectral efficiency concern, this article reviews—with a scope limited to prototyped systems—some of the existing works in the literature that pertain to increasing the spectral efficiency of backscatter systems. The prototyped systems can be grouped—based on the implementation technique used—into three groups: High-order modulation, single-sideband modulation, and pulse shaping. Based on the current trends and studied literature, the article concludes with discussions on some future directions and open-ended research problems such as optimal pulse shaping, the use of artificial intelligence, multi-carrier modulation, and agile modulation; which are all aim for overcoming the spectral-efficiency limit of contemporary backscatter systems.