19 July 2021 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
In many emerging applications, a dc–dc converter with a wide range of voltage conversion is necessary to equalize the output voltage level from various low voltage sources. To meet this purpose, as well as to reduce the number of power conversion stages in high step-up operation, a wide range of voltage gain dc–dc converter is proposed in this article. This converter is structured as an optimized integration of active switched-inductor configuration, and ladder-type voltage multiplier is merged with the regenerative-boost arrangement. Thereby, due to such an organization of structure, the proposed converter is developed the extremely high voltage-gain with comparatively fewer components. It has the advantages of clamped the input peak current, and higher voltage gain can be achieved at lower duty-ratios. This article describes the comprehensive steady-state analysis and performance characteristics in detail. Moreover, a detailed comparative performance analysis is carried out with existing recent literature. Finally, to validate the theoretical analysis and test feasibility and suitability of the proposed dc–dc converter, experimental results were observed using a 300 W fabricated prototype model.
9 February 2024 in IEEE Transactions on Circuits and Systems II: Express Briefs
In transformer-less grid connected solar PV system, the step-up dc-dc converter plays a crucial role to boosted up the DC-link voltage to desired value. This paper proposes a single switch hybrid (switched capacitor and inductor) network (SSHN) based step-up dc-dc converter to meet DC-link voltage. Compared to recently reported converters, the proposed SSHN dc-dc converter can achieve large voltage gain with minimum number of power devices. Due to presence of passive components in the hybrid network, it has fewer ripple content in the voltage and current, which helps to neutralize the interferences and prolongs the life of the power devices. The detailed operating waveform and analysis under various conduction modes have been presented in this paper. Moreover, the comparative performances of the proposed converter are discussed in detail. Finally, to validate the operational details a 500 W experimental prototype was built and the results are presented in this paper. It is worthy to note that the proposed SSHN converter can yield the maximum experimental efficiency of 94.3% at 300 W.
28 September 2021 in IEEE Transactions on Energy Conversion
In renewable energy micro-source applications, a wide range of voltage conversion of the step-up converter is an essential part to equalize the typical low voltage of micro-source with DC-bus voltage of Inverter or motor drives. In order to meet this purpose, an ultra-voltage gain step-up DC-DC converter is proposed in this paper. The proposed converter has made an arrangement of the regenerative-boost fed switched inductor and capacitor configurations. Thereby, due to such an organization of structure, the proposed converter can develop an extremely high voltage-gain even at lower duty ratios. In addition, it has the advantage of lower switching stress across all power semi-conductive diodes. Furthermore, this paper describes the steady-state analysis and comparative features of the converter with existing recent literature. Finally, to validate theoretical analysis and test the feasibility and suitability of the proposed ultra-gain converter, the experimental results were observed by a 500 W fabricated prototype.
15 March 2022 in International Journal of Circuit Theory and Applications
24 February 2020 in Journal of Circuits, Systems and Computers
11 February 2022 in International Journal of Circuit Theory and Applications