6 September 2019 in The Journal of Physical Chemistry C
We report the successful preparation of polycrystalline gallium nitride (poly-GaN) layers by thermal atomic layer deposition (ALD) at low temperatures (375–425 °C) from trimethylgallium (TMG) and ammonia (NH3) precursors. The growth per cycle (GPC) is found to be strongly dependent on the NH3 pulse duration and the NH3 partial pressure. The pressure dependence makes the ALD atypical. We propose that the ALD involves (i) the reversible formation of the hitherto-unreported TMG:NH3 surface adduct, resulting from NH3 physisorbing on a TMG surface site and (ii) the irreversible conversion of neighboring surface adducts to Ga–NH2–Ga linkages. The pressure dependence arises from the presumed reversible nature of the adduct formation on the surface, equivalent to the known reversible nature of its formation in the gas phase in metal organic chemical vapor deposition reactions. Using in situ spectroscopic ellipsometry (SE), the GPC monitored as a function of several ALD parameters is as high as 0.1 nm/cycle at 60 s NH3 pulse and 1.3 mbar NH3 partial pressure. The changes in the growth pattern (as monitored by SE) caused by changes in the ALD parameters support the proposed growth model. Ex situ characterization reveals that the layer is carbon-free, has a polycystalline wurtzitic structure, and shows a decent conformaility over Si trenches. Tuning the ALD recipe allows us to vary the layer composition from Ga-rich to stoichiometric GaN. The Ga richness is attributed to the simultaneous TMG dissociation at the deposition temperatures. This work is the first full-scale report on low temperature thermal ALD of poly-GaN from industrial precursors, occurring via a novel chemical pathway and not requiring any radical assistance (such as plasma) as used before.
8 May 2017 in Advanced Materials Interfaces
5 June 2015 in physica status solidi (c)
4 November 2013 in IEEE Transactions on Electron Devices
Carbon nanotube (CNT) vias were fabricated at 500 °C with different widths and lengths. The electrical resistance of the CNT vias was measured using four-point probe structures at temperatures between 25 °C and 190 °C. It was found that the temperature coefficient of resistance (TCR) of the CNT vias changes with both length and width. Most of the vias displayed a negative TCR between -300 and -400 ppm/K, against 3900 ppm/K for Cu, but for wider and shorter vias, this value becomes positive. A simple model is introduced, which can explain the length-dependent behavior.
3 December 2018 in The Journal of Physical Chemistry C
This article describes novel composite thin films consisting of GaN, C and Ga (referred to as ‘GaCN’, as an analogue to BCN and other carbonitrides) as a prospective material for future optical applications. This is due to their tuneable refractive index that depends on the carbon content. The composites are prepared by introducing alternating pulses of trimethylgallium (TMG) and ammonia (NH3) on silicon substrates to mimic an atomic layer deposition process. Since the GaCN material is hardly reported to the best of our knowledge, a comprehensive characterization is performed to investigate into its chemical nature, primarily to determine whether or not it exists as a single-phase material. It is revealed that GaCN is a composite, consisting of phase-segregated, nano-scale clusters of wurtzitic GaN polycrystals, in addition to inclusions of carbon, nitrogen and gallium, which are chemically bonded into several forms, but not belonging to the GaN crystals itself. By varying the deposition temperature between 400 and 600 oC, and the NH3 partial pressure between 0.7×10-3 and 7.25 mbar, layers with a wide compositional range of Ga, C and N are prepared. The role of carbon on the GaCN optical properties is significant: an increase of the refractive index from 2.19 at 1500 nm (for carbon-free polycrystalline GaN) to 2.46 (for GaCN) is achieved by merely 10 at. % of carbon addition. The presence of sp2 hybridized C=N clusters and carbon at the interface of the GaN polycrystals are proposed to determine their optical properties. Furthermore, the formation of the GaN polycrystals in the composite occurs through a TMG:NH3 surface-adduct assisted pathway, whereas the inclusions of carbon, nitrogen and gallium are formed by the thermal decomposition of the chemisorbed TMG species.
28 August 2018 in Journal of Applied Physics
In this work, we study the charge carrier transport and electroluminescence (EL) in thin-film polycrystalline (poly-) GaN/c-Si heterojunction diodes realized using a plasma enhanced atomic layer deposition process. The fabricated poly-GaN/p-Si diode with a native oxide at the interface showed a rectifying behavior (Ion/Ioff ratio ∼ 103 at ±3 V) with current-voltage characteristics reaching an ideality factor n of ∼5.17. The areal (Ja) and peripheral (Jp) components of the current density were extracted, and their temperature dependencies were studied. The space charge limited current (SCLC) in the presence of traps is identified as the dominant carrier transport mechanism for Ja in forward bias. An effective trap density of 4.6 × 1017/cm3 at a trap energy level of 0.13 eV below the GaN conduction band minimum was estimated by analyzing Ja. Other basic electrical properties of the material such as the free carrier concentration, effective density of states in the conduction band, electron mobility, and dielectric relaxation time were also determined from the current-voltage analysis in the SCLC regime. Further, infrared EL corresponding to the Si bandgap was observed from the fabricated diodes. The observed EL intensity from the GaN/p-Si heterojunction diode is ∼3 orders of magnitude higher as compared to the conventional Si only counterpart. The enhanced infrared light emission is attributed to the improved injector efficiency of the GaN/Si diode because of the wide bandgap of the poly-GaN layer and the resulting band discontinuity at the GaN/Si interface.