23 December 2019 in IEEE Sensors Journal
Indoor localization technologies are rapidly attracting attention in recent years since those are required by indoor navigation, IoT, smart city, etc. However, currently available indoor localization techniques, such as Wifi based method and multi-anchor based method, require high installation cost and have an insufficient robustness problem. This paper proposes a DC magnetic field based robust indoor 3D localization method with a single anchor coil. The proposed method estimates the sensor position from both geomagnetism and artificially generated DC magnetic field. The proposed method does not require any pre-measurement or multi-anchor nodes in the minimal configuration, and hence it can realize instant 3D localization with lower installation cost. This work analyzed the magnetic field generated by a coil both with numerical simulation and prototyped sensor node. We experimentally evaluated the proposed method supposing tabletop-scale and room-scale applications. For table-top scale applications, the proposed method estimates the 3D position with the maximum error of 6.5 mm in the range of 250 mm. For room-scale applications, which require coverage area expansion with multiple anchor coils, the proposed method localizes the sensor with the maximum error of 14.7 cm in 3.0 m × 1.5 m area.
8 February 2021 in IEEE Access
Ambient intelligence aims to actualize the environment that sense and utilize information around us without making us perceive the underlying systems. This work extends this concept by allowing us to track the movement and orientation of people and objects instantly. The proposed system can sense and let us know, for example, who met or talked to each other frequently, to whom s/he is often facing in the meeting, what stuffs people often use, where the person left his/her belongings, etc. Such information will help the system to understand the behavior patterns of each person and consequently can support and improve the personal life of users and even their mutual relationship. This article proposes an instant indoor magnetic tracking system that enables us to track the movement and orientation of people and objects by only attaching tiny electronic trackers to them. The size of the prototyped tracker is only 25.4mm $\times25.4$ mm $\times10.0$ mm, and hence it can be readily attached to almost anything and immediately activated. Evaluation results show that the proposed system applies to both room-scale tracking and tabletop scale tracking with 6 DoF (Degrees of Freedom).
1 April 2025 in IEEE Sensors Journal
This paper proposes a magnetic field-based backscatter communication method that enables ultra-low-power wireless communication. In this approach, a client node extracts energy from a magnetic field for wireless power transfer (WPT) and backscatters it while embedding information. The client node modulates the magnetic field for WPT by chopper-controlling the current in its power-receiver coil, eliminating the need for power-hungry oscillators. As a result, communication is achieved using only the energy required to drive the gate of a MOSFET, leading to significant power savings. Experimental validation with a prototyped system demonstrated a receivable power of 1.52mW, a 38 % increase over existing chopper-based methods, at a distance of 50 cm. Additionally, simulations using a TSMC 180 nm process revealed that communication energy can be reduced to 0.36 pJ/bit, achieving more than a 90 % reduction compared to conventional approaches. These results confirm that the proposed method greatly enhances energy efficiency, making it suitable for sub-meter-range, low-power wireless communication in embedded sensor applications, such as infrastructure monitoring.
18 November 2024 in IEEE Access
Wireless power transfer (WPT) technologies are rapidly attracting attention because of their wide application field. Among them, inductive power transfer (IPT) technology is most promising for daily usage in households. Foreign metal detection (FMD) is indispensable for IPT applications because foreign metal heats up easily in the magnetic field generated by IPT devices and causes a dangerous situation. On the other hand, the representation of the foreign metal as an equivalent circuit model is not readily available. Therefore, we need to use finite element method (FEM)-based electromagnetic field simulators, which require massive computation time and cost. This work proposes a novel simulation method of foreign metal in the magnetic field based on theoretical analysis. We establish an equation-based theory for simulating metal pieces as circuit elements and deliver an equivalent circuit model with a virtual inductance of the metal piece and a mutual inductance between the sense coil and the metal piece. The Z parameter of the extracted circuit model is compared with that of a FEM-based simulator. Evaluation results show that the proposed method returns the result 971 times faster than the FEM-based simulator with the memory usage of 1/3863, while the simulation error is at most 3.88 %.