Cristian Milton Mendoza Flores

Cristian Milton Mendoza Flores

Auto-generated profile, based on publicly available information

Cristian Milton Mendoza Flores

Universidad Nacional José Faustino Sánchez Carrión. Huacho, Perú

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 March 2022 in Universidad Ciencia y Tecnología
Verified
Journal Article
Open access
PDF file
SVSleyther Arturo De La Cruz Vega
Sleyther Arturo De La Cruz Vega
PMPablo A. Pezo Morales
Pablo A. Pezo Morales
ECEsther N. Noel Cornelio
Esther N. Noel Cornelio
CFCristian M. Mendoza Flores
Cristian M. Mendoza Flores
The main human settlements in Peru lack paved roads or affirmed carriage trails for the continuous or safe movement of vehicles. In this work, the evaluation of the application of seawater in the affirmed subgrade is exposed. Laboratory tests have been carried out, managing to see that the most important indicator of the resistance of the tracks helps in a significant way to improve the California Bearing Ratio (CBR). The results using with drinking water are 64.30%, 78.30%, and 95.20% of CBR and with seawater much higher CBR values of 99.20%, 90.90%, and 109.10%, for which an improvement of 34.90% was obtained and with this it is concluded that the addition of seawater significantly increases the California Bearing Ratio (CBR) of the affirmed subgrade. Keywords: Seawater, affirmed subgrade, CBR, road infrastructure. References [1]D. Flórez, and B. Bernabé, “El agua de mar en la alimentación y la terapéutica,” Sociedad Española de hidrología médica, vol. 30, no. 1, pp. 37-55, 2014. [2]J. Domenech, “Control de la calidad del agua”, Offarm, vol. 21, no. 10, pp. 138-146, 2002. [3]M. Bernardo et al., “Valoración terapéutica del agua de mar en modelos experimentales como terapia complementaria en anemia”, Medica UIS, vol 27, no. 3, pp. 9-18, 2014. [4]A. Fernández, “El agua: un recurso esencial”, Química Viva, vol 11, no. 3, pp. 147-170, 2012. [5]J. Miranda and D. Negrete, “Estabilización de suelos cohesivos con el uso de cloruro de calcio , Pontifica Universidad Católica del Ecuador, Quito, 2011. [6]D. Pumaricra, “Cloruro de magnesio como aditivo en el tratamiento de las propiedades físico mecánicas de la superficie de rodadura en carreteras no pavimentadas”, Pontifica Universidad Católica del Ecuador, Quito. (2019). [7]Ministerio de Transportes y Comunicaciones, “Manual de Carreteras: Suelos, Geología, Geotecnia y Pavimento – Sección Suelos y Pavimentos”, Lima, 2014. [8]C. Gutiérrez, “Estabilización química de carreteras no pavimentadas en el Perú y ventajas comparativas del cloruro de magnesio (bischofita) frente al cloruro de calcio”, Universidad Ricardo Palma, Lima, Perú, 2010. [9]C. Caruajulca, “Influencia del aditivo cloruro de sodio como estabilizante de la subrasante de la carretera tramo cruce el porongo – aeropuerto – Cajamarca”, Universidad Nacional de Cajamarca, Cajamarca, Perú, 2018. [10]C. Chavarry, R. Figueroa and R. Reynaga, “Estabilización química de capas granulares con cloruro de calcio para vías no pavimentadas”, Polo del conocimiento, vol. 5, no. 6, pp. 40-69, 2020. [11]P. Garnica and A. Pérez, “Estabilización de suelos con cloruro de sodio para su uso en las vías terrestres”, Publicación técnica, México, 2002. [12]H. Llerena, “Mejoramiento de una base superficial con cloruro de magnesio hexahidratado”, Universidad Nacional de San Agustín de Arequipa, Arequipa, Perú, 2015. [13]S. Cuadros, “Mejoramiento de las propiedades físico–mecánicas de la subrasante en una vía afirmada de departamental de la región Junín mediantela estabilización química con óxido de calcio – 2016”, Universidad Peruana los Andes, Huancayo, Perú, 2017. [14]J. Rivera, and R. Mejía, “Estabilización química de suelos - Materiales convencionales y activados alcalinamente”, Informador Técnico, vol. 84, no. 2, pp. 202-226, 2020. [15]G. Thenoux, and S. Vera, “Evaluación de la efectividad del cloruro de magnesio hexahidratado (bischofita) como estabilizador químico de capas de rodadura granulares”, in Consejos Superior de Investigaciones Científicas, p. 1. , 2002.

27 June 2022 in Revista Alfa
Verified
Journal Article
Closed access
PDF file
SVSleyther Arturo De La Cruz Vega
Sleyther Arturo De La Cruz Vega
CFCristian Milton Mendoza Flores
Cristian Milton Mendoza Flores
FVFernando Demetrio Llatas Villanueva
Fernando Demetrio Llatas Villanueva
JOJosé Antonio Garrido Oyola
José Antonio Garrido Oyola
Los diversos agentes erosivos, a los cuales son sometidas las estructuras de protección ribereña, aumentan su magnitud cada vez más, debido al constante cambio climático y al desarrollo que se produce en los pueblos cercanos al querer desplazar los cauces naturales y ampliar las zonas de cultivos. Ya que es objeto ingenieril hoy en día la realización de estructuras que tengan la capacidad de soportar las diversas cargas a las cuales sean sometidas de manera directa y moderar los efectos que puedan presentarse en la ribera del río. El objetivo es consolidar la información acerca de la erosión de estructuras y su efecto en inundaciones de zonas agrícolas. Las conclusiones muestran que el estudio de erosión de estructuras ribereñas y su efecto en inundaciones de zonas agrícolas, surge muchos factores que amenazan con el desgaste y la resistencia que pueden tener estas estructuras, provocando de esta manera un colapso inminente y afectando las áreas cultivadas, población y sus habitantes.

30 April 2024
Verified
Book Chapter
Open access
PDF file
SVSleyther Arturo De La Cruz Vega
Sleyther Arturo De La Cruz Vega
CNCcori Siello Vega Neyra
Ccori Siello Vega Neyra
CFCristian Milton Mendoza Flores
Cristian Milton Mendoza Flores
CSCarlos Miguel Aguilar Saldaña
Carlos Miguel Aguilar Saldaña
JEJuana Maribel Lavado Enriquez
Juana Maribel Lavado Enriquez
PMPedro Octavio Lévano Miranda
Pedro Octavio Lévano Miranda
El cemento es el compuesto más empleado en el desarrollo de proyectos de inversión, ya que tiene un consumo muy elevado y requiere que su información técnica sea al alcance de todos para determinar una marca determinada. Este artículo es de tipo aplicada, enfoque cuantitativo y nivel descriptivo. El objetivo es el análisis comparativo de los cementos comerciales que existen en el Perú, respecto a la resistencia, durabilidad, disponibilidad y preciso de los diferentes cementos como el cemento Portland, cemento Andino, cemento Lima, cemento Sur, cemento Yura, cemento Pacasmayo y cemento Selva. Se encontró que el cemento Sol tiene precios muy constantes alrededor de 29 soles, mientras que el cemento Apu tiene mayor variación de 26.50 a 32 soles, También, comparando los tiempos de fraguados inicial y final se encontró un rango de 110 min a 332 min dependiendo del tipo de cemento. El contenido del aire de los cementos puede afectar la resistencia a largo plazo.

9 March 2022 in Universidad Ciencia y Tecnología
Verified
Journal Article
Open access
PDF file
SVSleyther Arturo De La Cruz Vega
Sleyther Arturo De La Cruz Vega
CFCristian Milton Mendoza Flores
Cristian Milton Mendoza Flores
PMPablo Adrian Pezo Morales
Pablo Adrian Pezo Morales
JOJose Antonio Garrido Oyola
Jose Antonio Garrido Oyola
KFKevin Arturo Ascoy Flores
Kevin Arturo Ascoy Flores
RSRobert Edinson Suclupe Sandoval
Robert Edinson Suclupe Sandoval
The following book chapter presents the essential components of concrete, being a material that can acquire any shape in the liquid state and is very resistant in the hardened state as well as being aesthetic to be used in a diversity of applications. References [1]A. Garófalo, “Evaluación físico-química de los cementos a partir de la correlación de sus propiedades asociadas con la producción de hormigón”, escuela superior politécnica del Litoral, Ecuador, 2015. [2]AFCP, “La industria del cemento y la sostenibilidad”, Argentina, 2014. [3]ASTM, “Especificación normalizada para cemento Portland C 150-07”, Estados unidos, 2007. [4]E. Riva, “Materiales para el concreto”, Ed. ICG, 3era edición, Lima, 2000. [5]Indecopi, “Norma Técnica Peruana NTP 334.001”, Lima, Perú ,2001. [6]P. Aching and W. Del Castillo, “Influencia del plastificante reductor de agua sika-cem en el concreto cemento arena-Iquitos, 2018”, tesis, Universidad científica del Perú, Loreto, Peru, 2018. [7]P. Valera, “Influencia de las propiedades físico –químicas del agua del río Shilcayo en la resistencia del concreto f´c= 210 kg/cm2, Tarapoto-2018”, tesis, Universidad Cesar Vallejo, Tarapoto, Perú. [8]R. Salamanca, “Aplicación del cemento portland y los cementos adicionados”, ciencia e ingeniería Neogranadina, no. 10, pp. 33-38, 2001. [9]S. Laura, “Diseño de mezclas de concreto”, Universidad Nacional del Altiplano, Puno, Perú, 2006.

1 March 2022 in Athenea
Verified
Journal Article
Open access
PDF file
SVSleyther Arturo De La Cruz Vega
Sleyther Arturo De La Cruz Vega
CFCristian Milton Mendoza Flores
Cristian Milton Mendoza Flores
KFKevin Arturo Ascoy Flores
Kevin Arturo Ascoy Flores
JBJohnny Gregorio Cipriano Bautista
Johnny Gregorio Cipriano Bautista
JAJulio Cesar Barrenechea Alvarado
Julio Cesar Barrenechea Alvarado
GRGumercindo Flores Reyes
Gumercindo Flores Reyes
The soil analysis allows to know the physical, chemical, and mechanical properties of the projected soil, that is to say, the stratigraphic composition, the layers or strata that compose the different properties of the soil and its depth, as well as the depth at which its foundations should be made. It is important to recognize the type of soil because each of them has a specific property such as gravels are very permeable, sands have high capillarity, silts are suitable for compaction and clays are impermeable. Studies carried out on the soil, such as granulometry, allow it to be classified according to SUCS or AASHTO standards, moisture analysis allows the amount of water that is present together with the particles to be recognized, and the stratigraphic profile allows the heights of the soil layers and their color and texture to be known, consistency limits such as liquid limit and plastic limit allow it to be recognized if they have moldable properties, the specific gravity is an important factor in its design, the content of soluble salts allows to determine the type of cement to be used, the proctor test allows to know the compaction characteristics such as dry specific weight and optimum moisture and the direct shear test allows to recognize the angle of internal friction and cohesion present in the soil. The purpose of the soil study is to provide the necessary data to carry out the designs of engineering works, recognize the characteristics of the soil in situ, prevent possible problems in the future, as well as to establish the appropriate modifications to the construction processes and above all to guarantee the good operation of the building and to fulfill its useful lifetime.

1 August 2026 in Civil Engineering Journal
Verified
Journal Article
Open access
PDF file
SVSleyther Arturo De La Cruz Vega
Sleyther Arturo De La Cruz Vega
JMJohnny Mitchell Gomero Mancesidor
Johnny Mitchell Gomero Mancesidor
CFCristian Milton Mendoza Flores
Cristian Milton Mendoza Flores
The objective of this study was to determine the influence of moisture variation on the shear strength and stress–strain response of sandy soils subjected to different confinement levels. The applied methods followed a quantitative, applied, and quasi-experimental approach using reconstituted cylindrical specimens measuring 7.26 cm in diameter and 14.52 cm in height. Moisture contents of 0%, 2.5%, 5%, 7.5%, and 10% were evaluated under confining pressures ranging from 50 to 200 kPa. The findings demonstrated that the mechanical response strongly depends on both moisture content and confinement conditions. Under dry conditions, shear strength increased considerably with higher confinement levels due to greater interparticle friction and granular interlocking. At 2.5% moisture content, strength improved because capillary suction effects generated apparent cohesion. The maximum shear strength value, 870.77 kPa, was obtained at 7.5% moisture content, where capillary suction and granular densification reached an optimal balance. In contrast, at 10% moisture content, strength decreased due to excess pore water, which reduced effective stresses and interparticle friction. The novelty of this study lies in identifying the optimal moisture content that maximizes the shear strength of sandy soils under UU triaxial testing conditions.