22 January 2026 in Tribology International
29 August 2026 in SSRN Electronic Journal
Open-water-lubricated thrust bearings in rim-driven thrusters (RDTs) suffer severe sediment intrusion in coastal environments, destabilizing the water film and accelerating wear. This study investigates the effects of quartz particle size (4.5, 25, and 50 μm) on the friction and wear of a polymer/ZCuAl9Mn4 thrust-bearing pair under varying loads and speeds. Particle intrusion shifts the interface toward mixed or boundary lubrication. Higher speeds and loads suppress friction fluctuations by enhancing hydrodynamic lift and promoting particle embedment, respectively. At intermediate and high speeds, entrained quartz and metallic debris embed into the polymer, forming a composite layer. This mitigates pad wear but acts as an abrasive surface, increasing disc wear via micro-cutting. Conversely, at low speeds, insufficient metallic debris prevents composite layer formation, allowing trapped quartz to severely plough the exposed polymer. Characterization confirms a particle-embedding-assisted abrasive wear mechanism, where larger particles cause more severe ploughing. An Archard-based model identifies rotational speed as the dominant factor governing disc wear, with its sensitivity index increasing with particle size. Overall, friction and wear do not vary monotonically with particle size but are governed by coupled effects of size, film thickness, embedment, and fluid transport. These findings elucidate sediment-induced wear mechanisms and provide data for the service-life prediction of water-lubricated thrust bearings.