1 August 2018 in Journal of Applied Physiology
During walking, the elevation angles of the thigh, shank and foot (i.e. the angle between the segment and the vertical) co-vary along a characteristic loop constrained on a plane. Here we investigate how the shape of the loop and the orientation of the plane, which reflects the intersegmental coordination, change with the slope of the terrain and the speed of progression. Ten subjects walked on an inclined treadmill at different slopes (between -9{degree sign} and +9{degree sign}) and speeds (from 0.56 to 2.22 m s-1). A principal component analysis was performed on the co-variance matrix of the thigh, shank and foot elevation angles. At each slope and speed, the variance accounted for by the two principal components was >99% indicating that the planar covariation is maintained. The two principal components can be associated to the limb orientation (PC1*) and the limb length (PC2*). At low walking speeds, changes in the intersegmental coordination across slopes are characterized mainly by a change in the orientation of the covariation plane and in PC2*; and to a lesser extent by a change in PC1*. As speed increases, changes in the intersegmental coordination across slopes are more related to a change in PC1*, with limited changes in the orientation of the plane and in PC2*. Our results show that the kinematic patterns highly depend on both slope and speed.
1 January 2016 in Journal of Experimental Biology
When running on the level, muscles perform as much positive as negative external work. On a slope, the external positive and negative works performed are not equal. The present study is intended to analyse how the ratio between positive and negative work modifies the bouncing mechanism of running. Our goals are (i) to identify the changes in motion of the centre of mass of the body associated with the slope of the terrain and the speed of progression, (ii) to study the effect of these changes on the storage and release of elastic energy during contact and (iii) to propose a model that predicts the change in the bouncing mechanism with slope and speed. Therefore, the ground reaction forces were measured on ten subjects running on an instrumented treadmill at different slopes (from −9° to +9°) and different speeds (between 2.2 and 5.6 m s−1). The movements of the centre of mass of the body and its external mechanical energy were then evaluated. Our results suggest that the increase in the muscular power is contained (1) on a positive slope: by decreasing the step period and the downward movements of the body, and by increasing the duration of the push, and (2) on a negative slope: by increasing the step period and the duration of the brake, and by decreasing the upward movement of the body. Finally the spring-mass model of running was adapted to take into account the energy added or dissipated each step on a slope.
26 October 2017 in PLOS ONE
When ascending (descending) a slope, positive (negative) work must be performed to overcome changes in gravitational potential energy at the center of body mass (COM). This modifies the pendulum-like behavior of walking. The aim of this study is to analyze how energy exchange and mechanical work done vary within a step across slopes and speeds. Ten subjects walked on an instrumented treadmill at different slopes (from -9° to 9°), and speeds (between 0.56 and 2.22 m s-1). From the ground reaction forces, we evaluated energy of the COM, recovery (i.e. the potential-kinetic energy transduction) and pendular energy savings (i.e. the theoretical reduction in work due to this recovered energy) throughout the step. When walking uphill as compared to level, pendular energy savings increase during the first part of stance (when the COM is lifted) and decreases during the second part. Conversely in downhill walking, pendular energy savings decrease during the first part of stance and increase during the second part (when the COM is lowered). In uphill and downhill walking, the main phase of external work occurs around double support. Uphill, the positive work phase is extended during the beginning of single support to raise the body. Downhill, the negative work phase starts before double support, slowing the downward velocity of the body. Changes of the pendulum-like behavior as a function of slope can be illustrated by tilting the 'classical compass model' backwards (uphill) or forwards (downhill).
1 August 2019 in Journal of Neurophysiology
Organization of spinal motor output has become of interest for investigating differential activation of lumbar and sacral motor pools during locomotor tasks. Motor pools are associated with functional grouping of motoneurons of the lower limb muscles. Here we examined how the spatiotemporal organization of lumbar and sacral motor pool activity during walking is orchestrated with slope of terrain and speed of progression. Ten subjects walked on an instrumented treadmill at different slopes and imposed speeds. Kinetics, kinematics, and electromyography of 16 lower limb muscles were recorded. The spinal locomotor output was assessed by decomposing the coordinated muscle activation profiles into a small set of common factors and by mapping them onto the rostrocaudal location of the motoneuron pools. Our results show that lumbar and sacral motor pool activity depend on slope and speed. Compared with level walking, sacral motor pools decrease their activity at negative slopes and increase at positive slopes, whereas lumbar motor pools increase their engagement when both positive and negative slope increase. These findings are consistent with a differential involvement of the lumbar and the sacral motor pools in relation to changes in positive and negative center of body mass mechanical power production due to slope and speed.NEW & NOTEWORTHY In this study, the spatiotemporal maps of motoneuron activity in the spinal cord were assessed during walking at different slopes and speeds. We found differential involvement of lumbar and sacral motor pools in relation to changes in positive and negative center of body mass power production due to slope and speed. The results are consistent with recent findings about the specialization of neuronal networks located at different segments of the spinal cord for performing specific locomotor tasks.
1 May 2019 in Gait & Posture
6 November 2013 in Biology Open
Summary: Since the 1990s, treadmills have been equipped with multi-axis force transducers to measure the three components of the ground reaction forces during walking and running. These measurements are correctly performed if the whole treadmill (including the motor) is mounted on the transducers. In this case, the acceleration of the treadmill centre of mass relative to the reference frame of the laboratory is nil. The external forces exerted on one side of the treadmill are thus equal in magnitude and opposite in direction to the external forces exerted on the other side. However, uncertainty exists about the accuracy of these measures: due to friction between the belt and the tread-surface, due to the motor pulling the belt, some believe that it is not possible to correctly measure the horizontal components of the forces exerted by the feet on the belt. Here, we propose a simple model of an instrumented treadmill and we demonstrate (1) that the forces exerted by the subject moving on the upper part of the treadmill are accurately transmitted to the transducers placed under it and (2) that all internal forces – including friction – between the parts of the treadmill are cancelling each other.