Sintering shrinkage in recycled WC–Co hardmetal alloys has been investigated for two recycling routes: zinc reclaim and oxidation–reduction–carburization (ORC) and compared with virgin reference materials. Recycled powders are strongly agglomerated and exhibit significantly lower specific surface areas, making milling essential to enhance sinterability. Two stages are identified during solid-state sintering: up to 1000 ºC, densification is controlled by oxide content and specific surface area, while lattice strain plays a minor role. At higher temperatures, solid-state shrinkage kinetics become similar for virgin and recycled materials due to defect annealing and reduced surface area. Liquid-phase formation accelerates densification in virgin alloys, whereas an opposite trend is observed in recycled powders—especially ORC—due to a shift of solid-state diffusion to higher temperatures, which promotes overlap with liquid-phase rearrangement and solution–reprecipitation processes.
Circularity is vital in production of WC-Co hardmetals to reduce tungsten supply risk and environmental burdens. This study within the EU Horizon RESQTOOL-project compares hardmetals made from reclaimed WC-Co powders produced by two routes, zinc reclaim and oxidation-reduction, against a virgin powder reference. The study includes characterization of powder properties, investigation of different milling conditions and resulting compaction behavior. Sintered parts were evaluated in regard to density, magnetic parameters, hardness, and fracture toughness. Furthermore, thermogravimetry and dilatometry was used to investigate the sintering behavior. The results provide a basis to evaluate the potential of recycled WC-Co powders and add to the understanding of sustainable manufacturing.