1 April 2002 in Shock Waves
26 August 2010 in Optics Express
We propose a scheme for achieving widefield coherent anti-Stokes Raman scattering (CARS) microscopy images with sub-diffraction-limited resolution. This approach adds structured illumination to the widefield CARS configuration [Applied Physics Letters 84, 816 (2004)]. By capturing a number of images at different phases of the standing wave pattern, an image with up to three times the resolution of the original can be constructed. We develop a theoretical treatment of this system and perform numerical simulations for a typical CARS system, which indicate that resolutions around 120 nm are obtainable with the present scheme. As an imaging system, this method combines the advantages of sub-diffraction-limited resolution, endogenous contrast generation, and a wide field of view.
28 September 2009 in Optics Letters
Differential interference contrast microscopy, imaging by interferometric superposition of two displaced beams passed through a transparent sample, is one of the most sophisticated methods in classical microscopy. Here we demonstrate a versatile electronically controlled variant using a liquid-crystal spatial light modulator that displays a diffractive optical element and steers the beam separation. The orientation and magnitude of the shear angle and the relative phase of the two interfering beams can all be varied at video rates. The technique is demonstrated by imaging polystyrene beads in immersion oil and a sample of red blood cells. The method expands the capabilities of previous implementations of differential interference contrast microscopy by its nonmechanical control over all imaging parameters.
15 June 2010 in Optics Express
We describe the implementation of quantitative Differential Interference Contrast (DIC) Microscopy using a spatial light modulator (SLM) as a flexible Fourier filter in the optical path. The experimental arrangement allows for the all-electronic acquisition of multiple phase shifted DIC-images at video rates which are analyzed to yield the optical path length variation of the sample. The resolution of the technique is analyzed by retrieving the phase profiles of polystyrene spheres in immersion oil, and the method is then applied for quantitative imaging of biological samples. By reprogramming the diffractive structure displayed at the SLM it is possible to record the whole set of phase shifted DIC images simultaneously in different areas of the same camera chip. This allows for quantitative snap-shot imaging of a sample, which has applications for the investigation of dynamic processes.
1 January 2021 in Proceedings of the Combustion Institute
AVAnanthanarayanan Veeraragavan
Ananthanarayanan Veeraragavan
1 September 2016 in Journal of Spacecraft and Rockets
The thermal protection system of a reentry vehicle must endure extreme heating loads, leading to high surface temperatures and associated phenomena such as thermochemical ablation. Accurate modeling and prediction of these processes are critical for determining heat-shield sizing requirements; however, large uncertainties still remain. Due to the high costs associated with flight tests, ground testing remains an economical option for addressing these uncertainties. In this study, experiments with electrically preheated graphite samples are conducted in the University of Queensland’s X-2 expansion tunnel. Calibrated spectral measurements of the shock-layer emissions are taken in the wavelength region of 353 to 391 nm, targeting the carbon–nitrogen violet band for surface temperatures from 1770 to 2410 K. It is observed that carbon–nitrogen concentrations clearly increased within the boundary layer at higher surface temperatures. Numerical simulations fail to reproduce this behavior and instead indicate that production should be relatively constant. Increased levels of carbon–nitrogen radiation with surface temperature are also found throughout the entire shock layer and even the freestream, another observation that is not predicted by the simulations. It is proposed that this effect is due to spallation; however, further experiments are required to verify this.