2 July 2015 in IEEE Transactions on Magnetics
The fault current limiter (FCL) is one of the most useful measures for limiting fault currents in power systems. This paper introduces a new structure for a parallel-type permanent magnet (PM)-biased saturation-based FCL (PPFCL). The PPFCL consists of two magnetic devices connected in parallel and in magnetic counter opposite to each other. The operating principle and the core inductances in different states were analyzed using an electromagnetic equivalent circuit. In addition, a 220 V/10 A experimental prototype was designed and tested in a simple system and compared with Maxwell-3-D simulation and analytical methods. Finally, a 10 kV case-study model was created and compared with a series-type FCL, which verified the effectiveness of the limiter in high-voltage, large-capacity application. Experimental and simulation results have demonstrated that the PPFCL exhibits fast response and low impedance during normal operations, as well as high bias capability and low possibility of demagnetization of the PM during fault conditions.
2 June 2015 in IEEE Transactions on Magnetics
To reduce the requirement of dc-coil-generated magnetomotive force, this paper analyzes the method of using permanent magnets (PMs) to saturate the core. In this paper, a novel bridge-type hybrid saturated-core fault current limiter (BHFCL) is proposed to investigate the influence of PM. For the BHFCL, a bridge structure is designed to guarantee the fault clipping performance, with a fault limiting reactor. In addition, the compact structure of magnetic device and the shared coil of alternating current and dc could reduce cost and losses. To compare the influence of PMs on the performance of BHFCL and to validate the effectiveness of the proposed BHFCL, various FEA simulation models in a simple system are carried out by ANSOFT. The simulation results demonstrate that the BHFCL could achieve considerable energy consumption reduction with little effect on the normal condition voltage drop as well as the fault clipping ability. The BHFCL is efficient in fault clipping, and the performance is shown to depend mainly on the value of the reactor included in the bridge.