3 May 2018 in ACS Catalysis
19 April 2017 in Journal of Materials Chemistry A
There is a critical need to develop durable and reusable materials for oil–water separation, especially in harsh environments. Traditional anti-fouling mesh-based separation technologies are not reusable and limited by poor temperature resistance. Here we report a novel superhydrophilic and underwater superoleophobic NiO/Ni mesh which shows superior oil/water separation in harsh environments, with reusable and durable properties that can separate different oil–water mixtures with and without sand and soil contaminants, a >99% separation efficiency and up to 5.4 × 104 L m−2 h−1 permeate flux. The material is able to retain its superior performance over the 20 cycles we measured and for mixtures of sticky oils its performance is easily recoverable after a quick heat treatment. Our separation methodology is solely gravity-driven and consequently is expected to be highly energy-efficient. We anticipate that our separation methodology will have numerous applications, including in the clean-up of oil spills, wastewater treatment and other harsh condition oil–water separations.
5 July 2019 in ACS Applied Materials & Interfaces
11 July 2018 in Physical Review Letters
Chemomechanical effects are known to initiate fluid oscillations in certain liquid metals; however, they typically produce an irregular motion that is difficult to deactivate or control. Here we show that stimulating liquid gallium with electrochemistry can cause a metal drop to exhibit a heart beating effect by shape shifting at a telltale frequency. Unlike the effects reported in the past for mercury, the symmetry-breaking forces generated by using gallium propel the drop several millimeters with velocities of the order of 1 cm per second. We demonstrate pulsating dynamics between 0 and 610 beats per minute for droplets in a NaOH electrolyte at . The underlying mechanism is a self-regulating cycle initiated by fast electrochemical oxidation that adjusts the drop’s surface tension and causes a transformation from spherical to pancake form, followed by detachment from the circular electrode. As the beat frequency can be activated and controlled using a dc voltage, the electrochemical mechanism opens the way for fluid-based timers and actuators.
18 July 2020 in National Science Review
Knowledge of intrinsic wettability at solid/liquid interfaces at the molecular level perspective is significant in understanding crucial progress in some fields, such as electrochemistry, molecular biology and earth science. It is generally believed that surface wettability is determined by the surface chemical component and surface topography. However, when taking molecular structures and interactions into consideration, many intriguing phenomena would enrich or even redress our understanding of surface wettability. From the perspective of interfacial water molecule structures, here, we discovered that the intrinsic wettability of crystal metal oxide is not only dependent on the chemical components but also critically dependent on the crystal faces. For example, the |$( {1\bar{1}02} )$| crystal face of α-Al2O3 is intrinsically hydrophobic with a water contact angle near 90°, while another three crystal faces are intrinsically hydrophilic with water contact angles <65°. Based on surface energy analysis, it is found that the total surface energy, polar component and Lewis base portion of the hydrophobic crystal face are all smaller than the other three hydrophilic crystal faces indicating that they have different surface states. DFT simulation further revealed that the adsorbed interfacial water molecules on each crystal face hold various orientations. Herein, the third crucial factor for surface wettability from the perspective of the molecular level is presented, that is the orientations of adsorbed interfacial water molecules apart from the macro-level chemical component and surface topography. This study may serve as a source of inspiration for improving wetting theoretical models and designing controllable wettability at the molecular/atomic level.