1 March 2010 in IEEE Transactions on Industrial Electronics
In this paper, an innovative control strategy for hybrid power sources dedicated to automotive applications is detailed. First, an analysis of classical hybrid architectures using fuel cell (FC)/supercapacitors is presented. Then, an analysis of load requirements for automotive applications is proposed. A new control strategy of a single converter, based on a cascaded control loop with a decoupling strategy in the frequency domain, is fully explained. Finally, experimental results on a Ballard proton exchange membrane FC are presented to illustrate the effectiveness of the proposed method.
18 August 2011 in IEEE Transactions on Vehicular Technology
In this paper, a new control strategy, including saturation management of hybrid fuel-cell (FC)/ultracapacitor (UC) power sources, is described. First, an analysis of hybrid architectures using an FC and UCs for automotive applications is presented. Next, the model and the control strategy are described using energetic macroscopic representation (EMR). The main improvement over classical control strategies of such systems is to take into account saturation management with a dynamic reconfiguration of the energy management strategy (EMS). It includes the regenerative breaking in high state of charge (SOC) of the UC and the supply of a full power demand in low SOC of the UC. Finally, experimental results with small-scale devices show the effectiveness of the proposed control strategy using saturation management.
18 May 2011 in The European Physical Journal Applied Physics
This paper focuses on the hysteresis effect of the polarization characteristics of a polymer electrolyte membrane fuel cell (PEMFC), mainly due to the compressor-air supply system dynamics. Indeed in PEMFC/ultracapacitor hybrid vehicles, fuel cells can be used to supply the low frequencies of the power demand only. First, the different parts of a FC system are described and modeled in order to analyze the transient stack performance decrease and to identify its main influential factors for automotive applications. Then, apart from humidity and temperature variations, each phenomenon is dynamically described, leading to a complete mathematical model based on macroscopic component parameters. Thus, an analytical model based on this set of equations enables us to draw the static voltage versus current FC characteristics. Furthermore, the hysteresis effect on the V-I curve, which still occurs during low dynamic responses, is shown while temperature and humidity are kept constant. Finally, dynamic responses of the Ballard PEMFC Nexa 1200 W generator are analyzed, and detailed experimentation and simulation are carried out for a large magnitude sinusoidal waveform at different frequencies.
22 July 2010 in Engineering Journal
SPSengprasong Phrakonkham
Reviews on Micro-Grid Configuration and Dedicated Hybrid System Optimization Software Tools: Application to Laos