Ainara Jimenez-Irastorza

Ainara Jimenez-Irastorza

Auto-generated profile, based on publicly available information

Ainara Jimenez-Irastorza

FARSENS S.L.

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2014
Verified
Conference Paper
Closed access
IZIbon Zalbide
Ibon Zalbide
EDEduardo D'ENtremont
Eduardo D'ENtremont
AJAinara Jimenez
Ainara Jimenez
HSHector Solar
Hector Solar
ABAndoni Beriain
Andoni Beriain
RBRoc Berenguer
Roc Berenguer
This work provides an overview of the current state-of-the-art of the RFID technology in the Wireless Sensor Network (WSN) field. The different RFID alternatives are described with their pros and cons. The benefits and limitations of battery-free wireless sensors based on RFID technology are presented. Subsequently, the paper describes the design of an UHF RFID integrated circuit (IC) designed to harvest and store the power from an incoming RF signal in order to supply low power analog or digital sensors. The IC has been implemented using a low cost 0.35 μm CMOS process and it incorporates a serial peripheral interface (SPI) in order to communicate with the sensor. Battery-free wireless operation for industrial monitoring using the designed IC has been demonstrated by implementing two wireless sensors that monitor both temperature, using a thermistor, and pressure, using a commercial digital sensor. The wireless temperature sensor shows an error below ±1°C from -25°C to 105°C, whereas the pressure sensor error is below ±2 mbar from 325 to 1000 mbar. A battery free communication range of 1.5 meters is demonstrated for both sensors using a 2-W effective radiated output power reader.

12 December 2016 in IEEE Sensors Journal
Verified
Journal Article
Closed access
IJInigo Jauregi
Inigo Jauregi
HSHector Solar
Hector Solar
ABAndoni Beriain
Andoni Beriain
IZIbon Zalbide
Ibon Zalbide
AJAinara Jimenez
Ainara Jimenez
RBRoc Berenguer
Roc Berenguer
The number of wireless medical wearables has increased in recent years and is revolutionizing the current healthcare system. However, the state-of-the-art systems still need to be improved, as they are bulky, battery powered, and so require maintenance. On the contrary, battery-free wearables have unlimited lifetimes, are smaller, and are cheaper. This paper describes a design of a battery free wearable system that measures the skin temperature of the human body while at the same time collects energy from body heat. The system is composed of an UHF RFID temperature sensor tag located on the arm of the patient. It is assisted with extra power supply from a power harvesting module that stores the thermal energy dissipated from the neck of the patient. This paper presents the experimental results of the stored thermal energy, and characterizes the module in different conditions, e.g., still, walking indoors, and walking outdoors. Finally, the tag is tested in a fully passive condition and when it is power assisted. Our experimental results show that the communication range of the RFID sensor is improved by 100% when measurements are done every 750 ms and by 75% when measurements are done every 1000 ms when the sensor is assisted with the power harvesting module.

1 July 2010
Verified
Conference Paper
Closed access
NANaiara Arrue
Naiara Arrue
MLMarkos Losada
Markos Losada
LZLeticia Zamora-Cadenas
Leticia Zamora-Cadenas
AJAinara Jimenez-Irastorza
Ainara Jimenez-Irastorza
Igone VelezIgone Velez
Igone Velez
This article presents an indoor localization system based on Impulse-Radio Ultra-Wideband. A novel peak detection technique is proposed to be used for Round-Trip-Time ranging. Additionally, the accuracy and complexity of different positioning algorithms are studied. The effect of different configurations of the fixed and mobile transceivers on the accuracy is also analyzed. Simulations have been performed using realistic multipath channel models and the parameters of the IEEE 802.15.4a standard. These simulations show that the proposed localization system is able to achieve enough accuracy for an ambient assisted living application in any of the analyzed configurations.

1 November 2014
Verified
Conference Paper
Closed access
ABAndoni Beriain
Andoni Beriain
RBRoc Berenguer
Roc Berenguer
AJA. Jimenez-Irastorza
A. Jimenez-Irastorza
SFS. L. Farsens
S. L. Farsens
JMJ.A. Montiel-Nelson
J.A. Montiel-Nelson
RPR. Pulido
R. Pulido
There is a strong motivation for the development of low-power RFID sensors tags. In this work, a full passive RFID pressure sensor tag is presented paying special attention to a time to digital converter based on nonius oscillators. The circuit has been designed using a 90nm CMOS standard process. Post-layout simulations show that the nonius converter allows the estimation of the input pulse width in the range from 34μs to 51μs with a LSB of 2ns and an effective resolution of 8.3 bits. It requires a maximum conversion time of 97.8μs with an average power consumption of 1.59μW from a 0.7V supply voltage. The comparison of these results with the state of the art showed that, according to the authors' knowledge, the proposed sensor interface has the best characteristics in terms of minimum power consumption and supply voltage level. Therefore, it is a remarkable solution for passive RFID sensor applications.

1 September 2010
Verified
Conference Paper
Closed access
LZLeticia Zamora-Cadenas
Leticia Zamora-Cadenas
NANaiara Arrue
Naiara Arrue
AJAinara Jimenez-Irastorza
Ainara Jimenez-Irastorza
Igone VelezIgone Velez
Igone Velez
This work presents a three dimensional localization system for indoor environments based on Frequency Modulation Continuous Wave radar technology. An optimization of the Symmetric Double Sided Two Way Ranging estimator is proposed to improve the accuracy of the positioning algorithms. Moreover, the most promising positioning techniques, Recursive Least Square Method and Extended Kalman Filter, are analyzed. Measurements are presented that demonstrate that our proposal improves significantly the accuracy of the 3D positioning algorithms.

1 October 2013 in Microelectronics Journal
Verified
Journal Article
Closed access
AJA. Jimenez-Irastorza
A. Jimenez-Irastorza
JSJ.F. Sevillano
J.F. Sevillano
FAF. Arizti
F. Arizti
IRI. Rebollo
I. Rebollo
RBRoc Berenguer
Roc Berenguer