A synergistic extraction mixture containing chlorinated cobalt dicarbollide (CCD), carbamoylmethyl phosphine oxide (CMPO), and polyethylene glycol (PEG) has been investigated for the simultaneous recovery of cesium, strontium, lanthanides, and actinides from highly acidic media. The extraction properties of this mixture depend on the concentration ratio of the components. For recovery of all major radionuclides, the optimal ratio of [CCD]:[PEG]: [CMPO] = 5:1:1 should be used. The use of diphenyl-N,N-dibutylcarbamoylmethyl phosphine oxide and PEG-400 provides the most efficient recovery of cesium, strontium, lanthanides, and actinides. The possibility of using polyfluorinated ethers, esters, ketones, and sulfones as diluents was examined. Phenyltrifluoromethyl sulfone was the most suitable diluent tested. The use of this diluent allows good extraction properties, chemical and radiation stability, excellent explosion/fire-safety properties, and favorable hydrodynamic characteristics. The extraction of radio...
30 January 2001 in Solvent Extraction and Ion Exchange
A novel solvent extraction process, the Universal Extraction (UNEX) process, has been developed for the simultaneous separation of cesium, strontium, and the actinides from acidic waste solutions. The UNEX process solvent consists of chlorinated cobalt dicarbollide for the extraction of 137Cs, polyethylene glycol for the extraction of 90Sr, and diphenyl-N,N-dibutylcarbamoyl phosphine oxide for the extraction of the actinides and lanthanides. A nonnitroaromatic polar diluent consisting of phenyltrifluoromethyl sulfone has been developed for this process. A UNEX flowsheet consisting of a single solvent extraction cycle has been developed as a part of a collaborative effort between the Khlopin Radium Institute (KRI) and the Idaho National Engineering and Environmental Laboratory (INEEL). This flowsheet has been demonstrated with actual acidic radioactive tank waste at the INEEL using 24 stages of 2-cm diameter centrifugal contactors installed in a shielded cell facility. The activities of 137Cs, 90Sr, and th...
The presence of long-lived radionuclides presents a challenge to the management of radioactive wastes. Separation of the radionuclides from the waste solutions has the potential of significantly decreasing the costs associated with the immobilization and disposal of the radioactive waste by minimizing waste volumes. Typically, several separate processes are required for the separation of cesium, strontium, and actinides from radioactive wastes. A novel solvent extraction process, the Universal Extraction (UNEX) process, has been developed for the simultaneous separation of cesium, strontium, and the actinides from radioactive acidic waste solutions. The UNEX process solvent consists of chlorinated cobalt dicarbollide for the extraction of 137Cs, polyethylene glycol for the extraction of 90Sr, and diphenyl-N,N-di-n-butylcarbamoylmethyl phosphine oxide for the extraction of the actinides and lanthanides. A non-nitroaromatic polar diluent, phenyltrifluoromethyl sulfone, is used for this process. A U...
24 January 2014 in Solvent Extraction and Ion Exchange
The extraction of americium and lanthanides by diamides of 2,2′-dipyridyl-6,6′-dicarboxilic acid solutions in polar diluents was investigated. The dependence of extraction properties of the diamides on their structure was studied and the distribution ratios of americium and lanthanides from nitric acid solutions were determined. The highest extraction was found for the compounds with the ethyl-group and the alkyl-substituted aryl-group on the amidic nitrogen. The Am/Ln separation factors higher than 10 were achieved for extraction from high acidity media.