In this study, the analysis and control of stability of surrounding rock in deep fractured soft rock roadway located in the underground mine of Jinfeng gold mine in Guizhou Province, China, has been investigated. The surrounding rock of roadway has been analyzed to characterize its deformation and failure mechanism through field survey, testing of rock physical and mechanical properties, in situ stress measure, analysis of mineral components of rock, and investigation of rock fragmentation degree. Based on the numerical simulation technology, the influence of different factors on the stability of roadway is studied. The physical and mechanical properties of surrounding rock and the bearing capacity of surrounding rock layer are to be improved to maintain the stability of broken soft rock roadway as high ground stress, rock fragmentation, and poor lithology leading to tunnel instability. Hence, a high‐strength “cable bolt + fiber‐reinforced shotcrete + steel mesh + split sets + resin bolt + cement grouting” combined support system has been proposed to improve the effective bearing structure significantly with high integrity and bearing capacity.
12 December 2024 in Construction and Building Materials
Cemented paste backfill(CPB) is increasingly used in mines in alpine areas. The strength of CPB is unstable due to the influence of multiple factors such as low temperature. In order to obtain the uniaxial compressive strength(UCS) of CPB under the action of different factors, a large number of laboratory tests had to be conducted in the past, which is time-consuming and laborious. In this paper, a research on the UCS is conducted by means of a combination of indoor tests and machine learning. The sparrow search algorithm is used to optimize the extreme learning machine, thus solving the uncertainty of the extreme learning machine in determining the initial weights and thresholds. The strength prediction model of CPB based on SSA-ELM model is constructed with the curing temperature, sand-cement ratio, slurry concentration and curing time as input variables and UCS as output variables. Compared with the original ELM, the PSO-ELM and BP-ANN, the correlation coefficients improved from 0.8817, 0.9511, 0.9187 to 0.9979, which indicates that the SSA-ELM model has better prediction accuracy. In addition, correlation analysis shows that the low temperature(<20°C) environment has the largest effect on the UCS, which affects the development of UCS by influencing the process of hydration reaction.