1 December 2018 in Engineering Structures
1 January 2005 in Shock and Vibration
This study presents a new updating method based on measured frequency response functions. The objective function of the minimization procedure is formed by the difference between the measured and the analytical frequency responses. The updating parameters are the correction coefficients related to each the elementary mass and stiffness matrices. While making use of a number of incomplete measurements for some frequencies, one builds a non-linear system of equations. The linearisation of the numerical system leads to an iterative procedure. An intrinsic frequency parametrization is proposed in order to accelerate the convergence of the iterative system. The obtained results are comparable with those of the known least squares methods.
1 April 2012 in Composite Structures
15 February 2018 in Journal of Vibroengineering
In this paper, we present a new application based on Genetic Algorithm (GA) to detect damage in 3D frame structures. Finite Element Method (FEM) is used to build models for intact and damaged structures. The identification of damage is formulated as an optimization problem using GA and the changes in natural frequencies. A 3D frame structure with two floor is used, as a numerical example, for damage identification. The proposed method is then applied to identify some removed elements. The results obtained using FEM is validated using experimental benchmark test of a 3D frame structure with eight floors. The results show that the proposed technique gives good damage identification compared with literature [1]. Furthermore, there is no error recorded in the prediction of location, however a small error is recorded in detecting damage severity. It is concluded that GA is an efficient tool to quantify single and multiple damages with high precision in 3D frame structures.
15 November 2017 in Journal of Vibroengineering
Structural Health Monitoring (SHM) and impact monitoring of composite structures have become important research topics in the recent year. In this research, a non-destructive vibration-based damage detection method is formulated using Genetic Algorithm (GA) and compared with classical method. The robustness and reliability of the capability to locate and to estimate the severity of damage, based on changes in dynamic characteristics of a structure, is investigated. The objective function for the damage identification problem is established by using the residual force method (FRM). Numerical experiments using finite element analysis are performed on composite beams with different damage scenarios in order to clarify the validity of the developed technique. The comparison between estimated and real damage illustrates the efficiency of the algorithm in damage detection. The results show that the present approach is correct and efficient for detecting structural local damages in composite beam structures.
1 May 2017 in Journal of Physics: Conference Series
In this research paper, the damage in Carbon Fibre Reinforced Polymer (CFRP) laminate beams under free vibration and simply supported conditions, is investigated numerically by Finite Element Method (FEM) using Matlab program. The developed Cornwell Indicator is used for damage detection and quantification in the considered composite beams. The data was acquired by developing a software that performs dynamic analysis of composite beams based on FEM. The results show that the efficiency of the developed indicator.