15 March 2007 in The Journal of the Acoustical Society of America
Behavior of herring (Clupea harengus) is stimulated by two ocean-going research vessels; respectively designed with and without regard to radiated-noise-standards. Both vessels generate a reaction pattern, but, contrary to expectations, the reaction initiated by the silent vessel is stronger and more prolonged than the one initiated by the conventional vessel. The recommendations from the scientific community on noise-reduced designs were motivated by the expectation of minimizing bias on survey results caused by vessel-induced fish behavior. In conclusion, the candidate stimuli for vessel avoidance remain obscure. Noise reduction might be necessary but is insufficient to obtain stealth vessel assets during surveys.
16 April 2009 in ICES Journal of Marine Science
Godø, O. R., Patel, R., and Pedersen, G. 2009. Diel migration and swimbladder resonance of small fish: some implications for analyses of multifrequency echo data. – ICES Journal of Marine Science, 66: 1143–1148. Many fish with swimbladders exhibit diel vertical migrations (DVM). Ascents and descents of hundreds of metres occur, and altered swimbladder volume and buoyancy can result from incomplete secretion and resorption of gas. When acoustic observations are made near the resonance frequency of the swimbladder, the estimated fish biomass can be positively biased. When multiple-frequency echosounders are used, the frequency response of the backscatter might vary temporally and spatially and compromise the effectiveness of conventional target-identification methods. In this paper, variations in backscatter from mesopelagic fish are studied using data collected west of the British Isles with a five-frequency echosounder (Simrad EK60). Two acoustic layers, one dominated by pearlsides (Maurolicus muelleri) and the other by myctophids (Myctophidae), were monitored during their DVM. The frequency responses of the layers changed systematically, mainly characterized by increases in the nautical-area-backscattering coefficient (sA) values at 18 kHz relative to those at 38 kHz. This could have been caused by changes in the resonance frequencies of fish swimbladders, as they expanded and contracted during ascent and descent. Two sA maxima in the myctophids layer suggest the presence of two types of target with different scattering characteristics. Models of sound scatter from myctophid swimbladders suggest that these peaks have resulted from resonance scattering. The sA at 18 kHz attributed to M. muelleri also peaked, but at the maximum depth of their distribution. Spatial and temporal changes in the frequency responses of fish should be taken into account when pelagic fish communities are surveyed with multiple-frequency echosounders.
13 February 2020 in Journal of Geophysical Research: Oceans
Air bubble penetration depths are investigated with a bottom‐mounted echosounder at a seabed observatory in northern Norway. We compare a 1‐year time series of observed bubble depth against modeled and estimated turbulent kinetic energy flux from breaking waves as well as wind speed and sea state. We find that the hourly mean and maximum bubble depths are highly variable, reaching 18 and 38 m, respectively, and strongly correlated with wind and sea state. The bubble depth is shallowest during summer following the seasonal variations in wind speed and wave height. Summertime shallowing of the mixed layer depth is not limiting the penetration depth. A strong relationship between bubble depth and modeled turbulent kinetic energy flux from breaking waves is found, similar in strength to the relationship between bubble depth and wind speed. The wind sea is more strongly correlated with bubble depth than the total significant wave height, and the swell is only weakly correlated, suggesting that the wave model does a reasonable separation of swell and wind sea.
21 December 2023 in Methods in Ecology and Evolution
The use of quantitative broadband echosounders for biological studies and surveys can offer considerable advantages over narrowband echosounders. These include improved spectral‐based target identification and significantly increased ability to resolve individual targets. An understanding of current processing steps is required to fully utilise and further develop broadband acoustic methods in marine ecology. We describe the steps involved in processing broadband acoustic data from raw data to frequency dependent target strength () and volume backscattering strength () using data from the EK80 broadband scientific echosounder as examples. Although the overall processing steps are described and build on established methods from the literature, multiple choices need to be made during implementation. To highlight and discuss some of these choices and facilitate a common understanding within the community, we have also developed a Python code which will be made publicly available and open source. The code follows the steps using raw data from two single pings, showing the step‐by‐step processing from raw data to and . This code can serve as a reference for developing custom code or implementation in existing processing pipelines, as an educational tool and as a starting point for further development of broadband acoustic methods in fisheries acoustics.
17 September 2024 in ICES Journal of Marine Science
Uncrewed surface vehicles (USVs) equipped with echosounders have the potential to replace or enhance acoustic observations from conventional research vessels (RVs), increase spatial and temporal coverage, and reduce cost and carbon emission. We discuss the objectives, system requirements, infrastructure, and regulations for using USVs with echosounders to conduct ecological experiments, acoustic-trawl surveys, and long-term monitoring. We present four example applications of USVs with lengths <8 m, and highlight some advantages and disadvantages relative to RV-based data acquisitions. Sail-driven USVs operate continuously for months and are more mature than motorized USVs, but they are slower. To maintain the pace of an RV, multiple sail-powered USVs sample in coordination. In comparison, motorized USVs can travel as fast as RVs and therefore may facilitate a combined survey, interleaving USV and RV transects, with RV-based biological sampling. Important considerations for all USVs include platform design, noise and transducer motion mitigation, communications and operations infrastructure, onboard data processing, biological sampling approach, and legal requirements. This technology is evolving and applied in multiple disciplines, but further development and institutional commitment are needed to allow USVs equipped with echosounders to become ubiquitous and useful components of a worldwide network of autonomous ocean observation platforms.
1 April 2020 in Marine Pollution Bulletin
Measurements of underwater noise radiated under ship normal operations are presented. The acoustic data, from the cabled ocean observatory, are analyzed under each identified ship passage, which was obtained by the Automatic Identification System. Under each passage, sound pressure level is calculated to observe local noise variations due to shipping noise. This paper emphasizes the study of noise variations at the observatory, presents the noise measurements under identified ship passages in the last several years, and provides references for predictive models of underwater noise pollution from commercial ship traffic. From the passages of one ship to the passages of 26 ships, the measurements reveal similar variation patterns when the ships traveled at similar courses, but different patterns when they traveled at different courses. When evaluating the noise variations due to ship traffics, it is important to consider the shipping noise propagation as well as ship movement.