20 August 2013 in IEEE Transactions on Industrial Electronics
Recently, the world's first ever power electronic traction transformer (PETT) for a 15-kV 16.7-Hz railway grid has been newly developed, commissioned, and installed on the test locomotive, where the PETT is presently in use. The design and development of the PETT are described in two parts of this paper. The details related to the 1.2-MVA medium voltage (MV) PETT prototype, including the electrical design of the power circuit, the sizing and characterization of insulated-gate bipolar transistor (IGBT) devices, the design of the medium-frequency transformer, the cooling system design, insulation coordination, and protection, are presented in this part, while the preceding paper deals with the overall system requirements and control system design based on the low-voltage (LV) PETT prototype. The identical control hardware and software from the LV PETT prototype were used for the MV PETT prototype, thus reducing significantly commissioning time. The experimental results obtained during the testing are presented to demonstrate the performance of the developed MV PETT prototype.
1 January 2015 in IEEE Transactions on Power Electronics
In the future, new aspects from decentralized generation using different dc voltage levels are expected to influence the general concept of power exchange. Converter are needed to adapt the voltage between low voltage (LV), medium voltage (MV), and high voltage (HV). In this paper, a galvanic isolated bidirectional dc/dc converter based on the modular multilevel converter is studied, with a large potential for secure and flexible dc power flow control. The use of medium frequency transformation allows savings in copper and iron. A fundamental frequency modulation method is introduced for the presented converter, that enables variable stepup or step-down between primary and secondary dc voltage in discrete steps. The balancing mechanism of the internal power storage components is explained and verified by simulation and experiment.
25 February 2013 in IEEE Transactions on Power Electronics
Recently, a world's first ever power electronic traction transformer (PETT) for 15 kV, 16 2/3Hz railway grid, has been newly developed, commissioned, and installed on the locomotive, where it is presently in use. This marks an important milestone in the traction world. The design and development of the PETT are described in this paper, where a low-voltage (LV) PETT prototype is presented. It has been designed for the purposes of control hardware and software commissioning, thus serving a role of an analogue simulator. In this paper, emphasis is placed on the overall system requirements, from where control system has been developed, implemented, and successfully commissioned. The development of a 1.2MVA medium-voltage PETT prototype will be reported separately in accompanying paper.
15 May 2018 in IEEE Transactions on Power Electronics
This paper describes a novel, model based, design optimization methodology for high-power medium frequency transformers for medium-voltage high-power electronic applications, namely emerging solid state transformers. Presented procedure enables the designer to interactively select the most optimal design in a simple and intuitive way, while inherently offering flexibility in terms of various design alternatives, depending on the component availability. The core of the design algorithm is explained in detail together with all of the relevant modeling and technical challenges associated with realization of a prototype. A 100kW, 10 kHz medium frequency transformer prototype has been designed according to the presented algorithm, practically realized and thoroughly tested in order to verify the theoretical design.
20 November 2009 in IEEE Transactions on Energy Conversion
Rotor-flux-oriented control of multiphase induction machines with sinusoidal magnetomotive force (MMF) distribution can be realized theoretically by using only two current controllers in the synchronous reference frame. In practice, however, this is inadequate, as shown in this paper using experimental results collected from five-phase induction motor drive laboratory prototypes. Various asymmetries of the machine and nonideal nature of the inverter necessitate an appropriate modification of the current control scheme in the rotating reference frame. Such a modified current control scheme is developed in this paper, and its ability to provide operation of the machine with a practically perfectly sinusoidal and balanced system of five-phase currents is demonstrated experimentally.
1 September 2008 in IET Electric Power Applications
Industrial applications often require a number of variable speed electric drives. In the majority of cases, these multi-motor drive systems require independent control of individual motors. Over the past decade, research efforts have been made to reduce the number of power electronic devices required in multi-motor drive systems in order to reduce the overall complexity and hence cost of the drive. It has been shown recently that it is possible to independently control two three-phase induction machines using a five-leg voltage source inverter (VSI) as the supply, with one inverter leg being common to both machines. The existing pulse-width modulation (PWM) methods for this supply topology either limit the amount of DC bus voltage available to each machine or lead to uneven and increased switching frequency across five legs of the VSI. A new PWM method that effectively utilises the standard three-phase modulators in conjunction with appropriate modifications to generate modulation signals for all five legs of the VSI is presented. It enables an arbitrary distribution of the available DC bus voltage between the two machines. The considered supply topology, when utilised in conjunction with the developed PWM technique, is well suited to constant power applications such as centre-driven winders. Verification of the developed modulation method and its applicability to winder systems are demonstrated by experimental testing that includes both steady state and transient operation.