Building Energy Research Group, Department of Architecture and Civil Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong SAR, China
Auto-generated profile, based on publicly available information
Shuyang Li
Building Energy Research Group, Department of Architecture and Civil Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong SAR, China
The customary method for calculating daylight illuminance in a building is the daylight factor approach, which is assumed under the conventional overcast sky. However, such an approach is not flexible enough to predict diffuse illuminance in the presence of non-overcast skies. The daylight factor is invariant to building orientation and cannot take realistic and time-varying climatic conditions into account. Daylight in buildings is estimated using computer simulation techniques. However, full-scale computer simulations can be costly and time-consuming. Practitioners welcome simple calculation aids established via comprehensive analysis. Such easy tools would give building professionals and students basic and concise insight into the independency of different daylight parameters. Recently, daylight factor calculations have been extended to non-overcast skies. It means that the daylight factor approach can be a dynamic metric. This paper presents the calculation of the point daylight factor, the average daylight factor and the vertical daylight factor under all sky conditions, as well as building façade design implications. The performance of the three types of daylight factor for a typical room at various scattering angles is elaborated and evaluated; simple correlations between them are developed.
Daylighting serves as a crucial sustainable strategy in assessing the built environment. Climate-based daylight metrics (CBDMs) have been widely employed to evaluate the dynamic performance of daylight. However, conventional CBDM calculations heavily rely on time-consuming full-scale computer simulations. In addition, the CBDMs need representative annual daylight data that are essential for CBDM analysis, and can pose challenges in many locations. Even when suitable daylight data are available, they may not accurately reflect current trends and conditions. This study aims to determine the various CBDMs using both the 15 CIE Standard Skies and the three representative skies specific to Hong Kong. All data were simulated from a software named RADIANCE (version 5.3). The R2s of the CBDMs under both the 15 CIE Standard Skies and the three representative skies were more than 0.89, and the MBEs and RMSEs were not more than 5.4% and 9.1%, respectively, when the outdoor illuminance measured in 2004 was employed. The findings could be adopted for other locations where the required daylight parameters were not systematically recorded.
1 July 2019 in IOP Conference Series: Materials Science and Engineering
Solar energy is the most popular resource for power generation among the various available renewable energy alternatives. Solar radiation data are important for solar photovoltaic (PV) systems and passive energy-efficient building designs. Due to the unavailability of measurement in rural locations, solar radiation prediction models are required. In recent years, the Artificial Neural Networks (ANN) were successfully used for predicting solar radiation. However, previous works indicated that the ANN techniques were mainly focusing on prediction of monthly average or daily solar radiation, a few of them were modelled for predicting solar irradiance in hourly basis. In this study, prediction models of global solar irradiance on a horizontal surface will be developed based on neural-network techniques. Hourly meteorological variables between 2012 and 2015 acquired from the measurements made by local meteorological station were used for the study. To consider the effectiveness of individual predictors, different combinations of input variables were analysed using the Levenberg-Marquardt (LM) algorithm. Finally, equations were modelled by regression based on the important predictors. The developed models were used to estimate the global irradiance and assessed against measurement results.