18 May 2021 in Journal of Materials Chemistry A
Li-ion batteries (LIBs) have become critical components in the manufacture of electric vehicles (EVs) as they offer the best all-round performance compared to competing battery chemistries. However, LIB performance at low temperature (LT) extremes of EV operation (typically −40 to 0 °C) suffers from a reduced output and diminished cycle life. LT cycling increases cell impedance, diminishing Li ion diffusion through the cell, exacerbating electrode polarisation, and hindering interfacial Li+ desolvation. Herein, we present a comprehensive review of (i) the factors that influence LT Li-ion performance, (ii) outline the shortcomings of the current state-of-the-art and (iii) discuss recent findings in the field, focusing on alternative anode materials with particular emphasis on high-capacity, fast charging alternatives to the archetypal carbon (graphite) anode. Different approaches to improve LT LIB performance are outlined in an in-depth analysis of recent improvements from the anode perspective. These include electrolyte-driven enhancements, the resurgence of Li metal batteries, the impact of conductive coatings, elemental doping and nanocomposite formation, substitution of intercalating anodes with high-capacity Li alloying and Li conversion materials, and fast redox pseudocapacitance.
13 October 2020 in Nanoscale
Colloidally synthesized WSe2 nanocrystals with different morphologies and phases were investigated as anode materials for lithium-ion batteries.
2 February 2021 in ACS Applied Energy Materials
The electrochemical performance of Ge, an alloying anode in the form of directly grown nanowires (NWs), in Li-ion full cells (vs LiCoO2) was analyzed over a wide temperature range (−40 to 40 °C). LiCoO2||Ge cells in a standard electrolyte exhibited specific capacities 30× and 50× those of LiCoO2||C cells at −20 and −40 °C, respectively. We further show that propylene carbonate addition further improved the low-temperature performance of LiCoO2||Ge cells, achieving a specific capacity of 1091 mA h g–1 after 400 cycles when charged/discharged at −20 °C. At 40 °C, an additive mixture of ethyl methyl carbonate and lithium bis(oxalato)borate stabilized the capacity fade from 0.22 to 0.07% cycle–1. Similar electrolyte additives in LiCoO2||C cells did not allow for any gains in performance. Interestingly, the capacity retention of LiCoO2||Ge improved at low temperatures due to delayed amorphization of crystalline NWs, suppressing complete lithiation and high-order Li15Ge4 phase formation. The results show that alloying anodes in suitably configured electrolytes can deliver high performance at the extremes of temperature ranges where electric vehicles operate, conditions that are currently not viable for commercial batteries without energy-inefficient temperature regulation.
13 June 2019 in Chemical Communications
Herein, textured Cu foil is presented as an attractive current collector substrate for directly grown Ge nanowire (NW) anodes. Compared to planar stainless steel (SS) current collectors, textured Cu led to an increase in achievable mass loading, removal of the requirement for a catalyst deposition step, improved adhesion of the active material and dramatically enhanced capacity retention. When SS and textured Cu foil based anodes with similar areal loadings (∼1.4 mA h cm−2) were compared, the capacity after 250 cycles for textured Cu was 2.7 times higher than the SS anode, illustrating the key role of the current collector.
3 July 2023 in Chemical Communications
Surface potential mapping of Ge nanowire anodes showing the change in surface morphology and surface potential with solid electrolyte interphase layer formation during cycling.