This study investigates the general framework of the decisions in in-plant milk run systems, and also the other related decisions that affect or affected by milk run systems. Emphasis was placed on lean-oriented decisions and objectives. This was accomplished conceptually using extensive literature review. The study shows that there is a lack of studies regarding in-plant milk run system as a whole, and also in certain areas of the system such as manual feeding. The study shows also a tendency in some studies to deviate from lean manufacturing philosophy looking for optimality based on restrictive objectives. Furthermore, some differences in literature in defining some concepts related to in-plant milk run system were illustrated. The study presents new directions for future research especially those related to fast-response delivery in very changing environments.
This study aims to identify and determine risks and risks using the Hazard Identification Risk Assessment and Risk Control (HIRARC) method. By conducting prior monitoring and interviewing workers to find out the risks and impacts experienced by workers. Making a HIRARC table by assessing each aspect of hazards, work risks and controls that have been carried out and classifying controls based on 5 hierarchies. Data processing is conducted by analyzing the potential hazards with the HIRARC method. This study identified 12 potential hazards at Gandasari Energy. The findings of 12 risks can be carried out by risk with a hierarchy where there are 5 risk control efforts, including elimination, substitution, engineering control, administrative control, and personal protective equipment. Of the 12 potential hazards, many workers still do not use Personal Protective Equipment (PPE). The importance of PPE is to minimize the occurrence of work accidents.
Plastic has played a dominant role in human life as its usage is increasing over time. Plastic waste can harm the environment because plastic is not biodegradable. A collaboration adopted from the quintuple helix model was initiated by the local government of Cilegon, Indonesia, industry, and community to tackle the plastic waste problem. Plastic waste from households and industry is collected and processed in the plastic waste processing industry using the pyrolysis method producing gasoline, diesel, and kerosene. Kerosene is used by the community as fuel for cooking, whereas diesel and gasoline are used as boat fuels by fishermen. The collaboration is expected to provide economic and environmental benefits for the people in the Cilegon area. We conducted a cost and benefit analysis to evaluate the feasibility of this project from an economic and ecological point of view. The results will be used as input for conducting similar projects in other cities.
Product quality is a top priority that must be considered so that the products produced follow quality standards based on the characteristics and specifications set by the company. This study aims to identify the failure risk of the most dominant type of defect in Polyethylene (PE) Film products and identify the significant factors that cause the most dominant defects so that a proposal for improvement is obtained. The Fuzzy Failure mode and effect analysis (FFMEA) method is applied to reduce the risk of product defects in the PE Film production process. The steps with FFMEA are: a). Identify the type of defect of the Polyethylene film product, b). investigate the potential causes of each mode of failure and their impact, c). Identify the scale and linguistic terms for the input factors S, O, and D. d). Create a membership function appropriate for S, O, and D input factors, e). Change the input factor values S, O, and D to linguistic variables, f). establish an IF-Then rule, create a fuzzy risk priority number (FRPN) membership function, g). defuzzification. The results showed that the application of this method was quite effectively applied, the risk factor for the dominant defect in the production of PE film was the type of Pinhole defect caused by material factors, and the production process and temperature with proposed improvements were focused on periodic maintenance.
The main goal of this research is to investigate the factors influencing bank deposits in Indonesia between 2010 and 2023 by analysing data from 92 banks using the Panel Generalized Method of Moments (GMM). The study examines how bank competition levels, central bank policies, and other factors such as macroprudential policies and bank size impact deposit accumulation trends. The findings suggest that increased competition among banks is impacting deposits, which highlights a potential tension between competition and the stability of deposits in the banking sector. Alternatively, maintaining policies and appropriate regulations is crucial for instilling confidence in depositors, as macroprudential policies, bank size, credit, and capital all have a positive impact. We also expect the bank's determined interest rates and reserve requirements to have an effect. This underlines the responsiveness of deposit accumulation to shifts in policy. These findings can provide insights for policymakers and bank executives in Indonesia to enhance stability and optimize deposit-taking procedures within the banking industry
24 December 2025 in International Journal of Transport Development and Integration
Continuous improvement in service quality assurance, based on customer satisfaction, is critical for loading and unloading activities at dry bulk ports. Many ports are now adopting and refining various methods in response to the advancements of Industry 4.0. This research aims to develop and implement Adaptive DMAIC 4.0. Key advantages of this method include IoT based real-time monitoring systems, predictive data analytics, and process automation capabilities. Current Six Sigma measurements show level 3 (DPMO 11,800). While the Cp value of 1.19 indicates stable process stability, the Cpk value of 0.76 < 1 reveals remaining issues requiring systematic, continuous improvement. To enhance process performance, the average loading/unloading time should be maintained closer to the target midpoint of 1.5 minutes/bulk, creating a more balanced distribution. This adjustment would help increase the Cpk value to meet the minimum standard ≥ of 1.33, ensuring consistently efficient operations. In theory, implementing the DMAIC 4.0 framework will establish a system that is more resilient to internal and external disruptions, enables sustained performance improvement, and drives toward zero defects and Six Sigma capability. In practice, this approach significantly enhances loading and unloading performance for boosting capacity, operational capability, and TKBM professionalism while eliminating human error.