1 October 2021 in Nuclear Fusion
23 September 2020 in Nuclear Fusion
5 December 2019 in Plasma Physics and Controlled Fusion
Recently, the first ever 100 s long, steady-state H-mode discharge with good control of impurities, core and edge MHD stabilities, and heat exhaust was demonstrated in the Experimental Advanced Superconducting Tokamak (EAST) using the ITER-like (International Tokamak Experimental Reactor) tungsten upper divertor. Using both radio frequency (RF) power and neutral beam injection (NBI) heating, EAST has demonstrated fully non-inductive scenarios with an extension of fusion performance at high density and low rotation: β P ∼ 2.5, β N ∼ 2.0, H 98,y2 ∼ 1.2, bootstrap current fraction f BS ∼50% at q 95 ∼ 6.8. With pure RF power heating, plasmas have been maintained for up to 21 s (over 40 times the current relaxation time) with zero loop voltage and small edge localized modes (ELMs) at high density (n e /n GW ∼ 0.6–0.8), β P ∼ 2.0, β N ∼ 1.6, and ƒ BS ∼47%. Experimental investigations show how plasma current profiles, turbulent transport and radiation properties self-consistently evolve toward fusion relevant steady state conditions. Modeling and physics experiments have confirmed the synergistic effects between electron cyclotron heating (ECH) and low hybrid wave (LHW), where ECH enhances the heating and current drive from LHW injection, enabling fully non-inductive operation at higher density. Small/no ELMs facilitate the RF power coupling in the H-mode phase and reduce divertor erosion. A low tungsten concentration was observed at high β P with a hollow profile in the core. Reduction of the peak divertor heat flux with f rad of up to 40% was compatible with the high β P scenario by using active radiation feedback control. With features such as dominant electron heating, zero/low NBI torque and an ITER-like tungsten divertor, fully non-inductive high-performance experiments on EAST offer unique contributions towards the succesful operation of ITER and CFETR (the Chinese Fusion Engineering Testing Reactor).
4 January 2019 in Nuclear Fusion
14 July 2020 in Nuclear Fusion
30 May 2019 in Plasma Physics and Controlled Fusion
The nonlinear growth of the m / n = 3/1 double tearing mode (DTM) is numerically investigated in cylinder geometry with non-monotonic radial profiles of the equilibrium safety factor, having two q = 3 surfaces. The formation of plasmoids is found in high Lundquist number regime in such configurations for the first time. During the nonlinear growth of DTM, long and thin Sweet–Parker current sheets are formed near the original inner and outer rational surfaces and become tearing unstable for a large enough Lundquist number, leading to secondary and tertiary magnetic islands which accelerate the magnetic reconnection. The plasmoids also affect the magnetic topology at nonlinear mode saturation. The system can eventually saturate at a quasi-stationary state with small island pairs. The simulation results show that the Lundquist number and the distance between two rational surfaces have important effects on plasmoids formation.