A simple and low‐cost and highly calibrated probe sonication method was used to prepare bismuth oxide nanoparticles (Bi2O3 NPs). The formation of a well‐crystalline sample at the end of the product has been further calcined at 600°C for 2 hrs. The powder X‐ray diffraction (PXRD) patterns of the NPs substantiated the monoclinic structure (space group P21/c), and the average crystallite size was found to be 60 nm, which was also confirmed by transmission electron microscopic (TEM) studies. Scanning electron microscopic (SEM) images depicted highly porous Bi2O3 NPs with little agglomeration. Utilizing diffused reflectance spectra (DRS) data, the energy bandgap (Eg) value of 3.3 eV was deduced for Bi2O3 NPs, and their semiconductor behavior has been confirmed. Two dyes, methylene blue (MB) and acid green (AG) were utilized for degradation studies using Bi2O3 NPs under UV light irradiation (from 0 to 120 min). The photocatalytic degradation was found to be maximum for MB (93.45%) and AR (97.80%) dyes. Cyclic voltammetric (CV) and sensor studies using the electrochemical impedance spectroscopy (EIS) were performed. The specific capacitance value of 25.5 Fg-1 was deduced from the cyclic voltammograms of the Bi2O3 electrode in 0.1 N HCl with a scan rate of 10 to 50 mV/s. From the obtained EIS data, the Bi2O3 electrode showed pseudocapacitive characteristics. The prepared electrodes also exhibited high sensitivity towards the detection of ascorbic acid and lead. Hence, sonochemically synthesized Bi2O3 NPs are possibly hopeful for excellent photocatalytic and electrochemical sensing of biomolecules.
30 May 2023 in e-Prime - Advances in Electrical Engineering, Electronics and Energy
Graphical illustration of the solution combustion synthesis of ZnO nanoparticles, their physicochemical characterization, photocatalytic degradation of Congo red dye, and electrochemical non-enzymatic glucose sensing.
This study reported the influence of La10Si6O27:Eu3+ nanophosphor prepared by solution combustion method by using oxalyl dihydrazidecas fuel on the electrochemical performance in HCl used as an electrolyte. The structural morphology of the nanoparticles was characterized by PXRD, it confirms pure hexagonal oxyapatite phase with the crystallite size averaging between 20-30 nm. To examine the electrochemical behaviour of the nanophosphor in an acidic medium, both electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) techniques were utilized. For the electrochemical analysis used in this study, a modified carbon paste electrode (CPE) with the nanophosphor was utilized as the working electrode, which is an excellent sense of the paracetamol and sildenafil citrate (viagra). Further, the synthesized La10Si6O27:Eu3+ nanophosphor exhibited improved photocatalytic mobility (PCM) and enhanced photostability when exposed to UV light during the decomposition process of direct green dye. These findings suggest that the developed material holds great promise as a potential sensor and photocatalyst.