Polyaniline Emeraldine Salt (PANI ES) as a conductive polymer has been used as a Pt-free counter electrode materials in DSSC. In this study, polymerization temperature was varied at relatively high temperature from 308 to 348 K with respect to the standard low polymerization temperature at 273 K. The synthesis held in varied high-temperature to study the effect of synthesis condition resulted to the performance as counter electrode in DSSC. The effect of high-temperature synthesis condition gives interesting results, the FTIR-ATR spectra show the presence of vibrational modes of phenazine structure obtained at high polymerization temperature, indicate the changing in the chain geometry. Raman Spectroscopy shows the decrease of the I1194/I1623 intensity ratio that can be interpreted that the degree-of-freedom of C-H bond bending mode decreases in the benzenoid ring, while the stretching mode degree-of-freedom along the chain is preserved or increased. The electrical conductivity profile has changed from metal-like at low-temperature into a semiconductor-like profile at high-temperature. Scanning Electron Microscope images reveals that a change in the morphology of PANI ES with temperature. At low-temperature (273 K) the morphology has a globular shape, while at high-temperature it tends to form nanorod structure. DSSC device with highest efficiency is attained for PANI ES polymerized at 273 K (1.91%) due to its high conductivity. The lowest efficiency is observed in device using PANI ES synthesized at 328 K (1.15%) due to its low conductivity due to the formation of phenazine structure.
27 February 2021 in Physical Chemistry Chemical Physics
Polyaniline (PANI) is a conductive polymer that has been studied intensively due to its high conductivity, ease of synthesis, fascinating doping mechanism, and a broad spectrum of applications. Polyaniline doped HCl was synthesized by a common direct-oxidation method of aniline using ammonium persulfate as the oxidant in HCl solution at various temperatures. This study focused on conductivity alteration of PANI-ES (emeraldine salt) due to the interchain interaction observed at different reaction temperatures from room temperature down to −15 °C. The molecular structure of PANI-ES was determined by FTIR and Raman spectroscopy. At low reaction temperature, the electronic transport properties improve significantly as reflected by its conductivity. X-ray diffraction (XRD) analysis shows that the value d{(110)} and β play an important role in electron transport through face-to-face and side-to-side interactions, respectively. Scanning electron microscopy (SEM) analysis shows that the morphology of the synthesized PANI-ES consists of granules that are interconnected by nanofibers. Here, the correlation between electronic transport properties, structure, and morphology induced by reaction temperature was analyzed and discussed in detail. Moreover, PANI ES synthesized at 0 °C was applied as an electrocatalytic active layer in the DSSC's counter-electrode with a promising result.
This paper investigates the adsorption behavior of polyaniline (PANI) towards triiodide ion (I3−) solution in acetonitrile. Two different types of PANI, namely PANI emeraldine salt (PANI ES) and nanostructured PANI ES (NPES) were prepared by the rapid mixing and interfacial polymerization methods, respectively. FTIR and Raman spectroscopy results show that both PANI ES and NPES have similar vibrational features, indicating a similar molecular structure. NPES particles are interconnected granules with thorny durian-like surface morphology and better shape uniformity than PANI ES. The maximum adsorption capacity of NPES towards triiodide (I3−) ions is higher than that of PANI ES; however, both of them obey the dual-site Langmuir–Freundlich isotherm. The calculated thermodynamic parameters reveal the spontaneous and endothermic adsorption processes for both types of PANI. The positively charged group in PANI (C–N+) provides more favorable adsorption sites for I3− ions through electrostatic interactions, as confirmed by Raman spectroscopy. The photovoltaic and electrochemical performance data confirm the higher power conversion efficiency (∼30%) of the NPES counter electrode compared to that of PANI ES. The thorny durian-like surface morphology of NPES enhances the number of adsorption sites for I3− ions, thereby facilitating better electrolyte regeneration in dye-sensitized solar cells (DSSC).
1 August 2019 in IOP Conference Series: Materials Science and Engineering
Polyaniline (PANI) is one of conducting polymers which is widely used in various applications especially energy field, like solar cells and batteries. PANI emeraldine salt (PANI ES) is the only type of conducting PANI which can be easily synthesized using a direct mixing method in an oxidizing solution. Ammonium persulfate (APS) is one example of a strong oxidizing agent which is often used in PANI synthesis. The APS concentrations used in this study ranged from 0.1 to 1 M. Infrared and Raman spectroscopy shows that the addition of APS concentrations above 0.5 M produces the non-conducting fully oxidized PANI and phenazine species. Scanning electron microscope (SEM) showed morphological changes of PANI ES from nanofiber (diameter 80 - 110 nm) to granules (diameter 20 - 70 nm) as APS concentration increases. Based on Electrochemical impedance spectroscopy (EIS), conductivity of PANI increases as APS concentration increases with maximum conductivity of 0.36 S cm−1 at 0.5 M.
10 April 2019 in Bulletin of Chemical Reaction Engineering & Catalysis
Titanium dioxide (TiO2) is a semiconductor material that plays an important role in photocatalysis. Bicontinuous concentric lamellar (bcl) is an interesting morphology with an open channel pore structure that has been successfully synthesized on silica-based materials. If bcl morphology can be applied in TiO2 system, then many surface properties of TiO2 can be enhanced, i.e. photocatalytic activity. A simple and effective strategy has been demonstrated to transform aggregated and spherical TiO2 particles to bcl morphology via alkaline hydrothermal route. Alkaline hydrothermal treatment successfully transforms TiO2 particle surface to have bcl morphology through swelling with ammonia then followed by phase segregation process. We proposed this strategy as a general pathway to transform the particle surface with any shape to have bcl morphology.