17 November 2022 in IEEE Transactions on Instrumentation and Measurement
A miniature FBG vibration sensor with high performance and low angle dependence has been proposed and applied in the two-dimensional vibration measurement of a vibration isolation platform in this paper. Considering the bonding points with maxim replacement, the sensitivity and resonant frequency theoretical model of the elastomer and packaged small-diameter FBG were established. The genetic algorithm was utilized to achieve the globally optimized structure sizes under multiple constraints, while the modal simulation analysis was carried out to verify the result. A novel ‘figure of merit’ defined as the product of the resonant frequency, the sensitivity, and the inverse of package volume was proposed for the performance evaluation of the sensor in the unit space of its package. The first-order and second-order frequencies of its X/Y direction of 1105.4 Hz/1266.1 Hz, while the sensitivity is 127.861 pm/g and 116.668 pm/g, correspondingly. The cross-interference in the X/Y directions of the sensor is less than 2%. Moreover, the test results of the angle dependence of the sensitivity show that the sensor possesses consistent sensitivity in all directions of the 2-d plane, while the fitted sin functions in the X/Y direction have a high R 2 of 0.99851 and 0.99831, respectively. Finally, the 2-D vector vibration measurement capacity of this sensor was demonstrated on a rubber spring vibration isolation platform. The results show that this miniature 2-D vibration sensor is suitable for medium-high frequencies vibration vector measurement and has a bright application prospect for the monitoring of machines.
3 March 2025 in IEEE Sensors Journal
Optical fiber Fabry-Perot (F-P) sensor is a high-sensitivity sensor based on fiber optic sensing and interference principle, which can be used in sensing of displacement, stress, strain, temperature, etc. In this paper, we propose an optical fiber F-P displacement sensor based on a flexible hinge structure, and develop a compact micro-sized displacement sensor with high sensitivity to measure micro-displacement, with a size of 15×10×2.4 mm3. On the basis of mathematical model, we used an optimization algorithm to globally optimize the displacement sensitivity and obtained the optimal dimensional parameters of the sensor structure. We used ANSYS to simulate and analyze our sensor, and the results were basically consistent with the theoretical results. Then, we encapsulated and pasted the F-P cavity with a small-diameter glass capillary, and the F-P was fabricated with an optical fiber at one end and an FBG (fiber Bragg Grating) for temperature measurement at the other end. The final experimental tests showed that the sensor had good linearity and displacement sensitivity can reach up to 64100 pm/mm. The temperature sensitivity is 10.04 pm/° for FBG and 33.04 pm/° for F-P.