4 June 2013 in Optics Express
Silicon nitride is demonstrated as a high performance and cost-effective solution for dense integrated photonic circuits in the visible spectrum. Experimental results for nanophotonic waveguides fabricated in a standard CMOS pilot line with losses below 0.71dB/cm in an aqueous environment and 0.51dB/cm with silicon dioxide cladding are reported. Design and characterization of waveguide bends, grating couplers and multimode interference couplers (MMI) at a wavelength of 660 nm are presented. The index contrast of this technology enables high integration densities with insertion losses below 0.05 dB per 90° bend for radii as small as 35 µm. By a proper design of the buried oxide layer thickness, grating couplers with efficiencies above 38% for the TE polarization have been obtained.
13 March 2013 in Optics Express
We propose an ultra-broadband multimode interference (MMI) coupler with a wavelength range exceeding the O, E, S, C, L and U optical communication bands. For the first time, the dispersion property of the MMI section is engineered using a subwavelength grating structure to mitigate wavelength dependence of the device. We present a 2 × 2 MMI design with a bandwidth of 450nm, an almost fivefold enhancement compared to conventional designs, maintaining insertion loss, power imbalance and MMI phase deviation below 1dB, 0.6dB and 3°, respectively. The design is performed using an in-house tool based on the 2D Fourier Eigenmode Expansion Method (F-EEM) and verified with a 3D Finite Difference Time Domain (FDTD) simulator.
11 September 2014 in Scientific Reports
Ring resonator modulators (RRM) combine extreme compactness, low power consumption and wavelength division multiplexing functionality, making them a frontrunner for addressing the scalability requirements of short distance optical links. To extend data rates beyond the classically assumed bandwidth capability, we derive and experimentally verify closed form equations of the electro-optic response and asymmetric side band generation resulting from inherent transient time dynamics and leverage these to significantly improve device performance. An equivalent circuit description with a commonly used peaking amplifier model allows straightforward assessment of the effect on existing communication system architectures. A small signal analytical expression of peaking in the electro-optic response of RRMs is derived and used to extend the electro-optic bandwidth of the device above 40 GHz as well as to open eye diagrams penalized by intersymbol interference at 32, 40 and 44 Gbps. Predicted peaking and asymmetric side band generation are in excellent agreement with experiments.
28 August 2015 in Optics Express
We report on the design of Silicon Mach-Zehnder carrier depletion modulators relying on epitaxially grown vertical junction diodes. Unprecedented spatial control over doping profiles resulting from combining local ion implantation with epitaxial overgrowth enables highly linear phase shifters with high modulation efficiency and comparatively low insertion losses. A high average phase shifter efficiency of VπL = 0.74 V⋅cm is reached between 0 V and 2 V reverse bias, while maintaining optical losses at 4.2 dB/mm and the intrinsic RC cutoff frequency at 48 GHz (both at 1 V reverse bias). The fabrication process, the sensitivity to fabrication tolerances, the phase shifter performance and examples of lumped element and travelling wave modulators are modeled in detail. Device linearity is shown to be sufficient to support complex modulation formats such as 16-QAM.
10 July 2013 in Optics Letters
High-performance silicon nitride focusing grating couplers with AlCu/TiN reflectors for a visible wavelength (660 nm) have been designed and fabricated in a standard complementary metal-oxide-semiconductor pilot line. The influence of the bottom oxide cladding thickness on the grating decay length and efficiency is theoretically and experimentally investigated. It is shown how the metal reflector not only increases the efficiency but also allows reduction of the radiated beam size. Coupling efficiencies above 59% have been measured for compact focusing gratings.
1 July 2014 in IEEE Journal of Selected Topics in Quantum Electronics
We report on two edge-coupling and power splitting devices for hybrid integration of III-V lasers with sub-micrometric silicon-on-insulator waveguides. The proposed devices relax the horizontal alignment tolerances required to achieve high coupling efficiencies and are suitable for passively aligned assembly with pick-and-place tools. Light is coupled to two on-chip single mode SOI waveguides with almost identical power coupling efficiency, but with a varying relative phase accommodating the lateral misalignment between the laser diode and the coupling devices, and is suitable for the implementation of parallel optics transmitters. Experimental characterization with both a lensed fiber and a Fabry-Pérot semiconductor laser diode has been performed. Excess insertion losses (in addition to the 3 dB splitting) taken as the worst case over both waveguides of respectively 2 ± 0.3 dB and 3.1 ± 0.3 dB, as well as excellent 1 dB loss placement tolerance range of respectively 2.8 μm and 3.8 μm (worst case over both in-plane axes) have been measured for the two devices. Back-reflections to the laser are below -20 dB for both devices within the 1 dB misalignment range. Devices were fabricated with 193 nm DUV optical lithography and are compatible with mass-manufacturing with mainstream CMOS technology.