1 February 2020 in Mechanism and Machine Theory
12 February 2018 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
In the field of mechanical engineering, involute helical gears are widely used. Compared with the involute spur gear, helical gears have a high bearing strength, more smooth transmission, less impact and less noise. The internal gear pairs have the features of large transmission ratio, low vibration, low noise and low wear and hence are widely used in planetary gear transmission systems. In order to meet the requirements of high strength, high speed of the modern gear transmission systems, a new type of asymmetric involute internal helical gears is designed based on conventional involute gears. This paper discusses the gear shaper cutter modeling for machining this new gear, analyzes the formation principle of asymmetric tooth profile and establishes a three-dimensional modeling by SolidWorks. Through MATLAB simulation, pressure angle, tooth number, coefficient of displacement and contact ratio of conventional and asymmetric gear are compared and analyzed. Using ANSYS, two types of gears are compared on strength in order to demonstrate superiority of asymmetric tooth and further study about the asymmetric internal helical gears.
12 June 2019 in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
The load sharing characteristics of the herringbone planetary transmission system are a key indicator for evaluating the bearing stability and reliability of each planet gear in the transmission system. The value of the load sharing coefficient is closely related to the manufacturing error and the assembly error in gear processing and assembly process. Therefore, it is indispensable to study the influence mechanism of these errors on the load sharing characteristics of the transmission system. Nevertheless, researches on the multi-coupling transmission error to the load sharing characteristics of herringbone planetary transmission system did not receive enough attention, but much of the single errors. Based on the centralized parameters theory and the Lagrange method, this research establishes a dynamic model for herringbone planetary transmission system and creatively proposes a study of multi-coupling error which consists of eccentric error, tooth profile error, stagger angle and assembly error. This work shows that the changing regulation of the load sharing characteristics with any one of the above errors is different. However, the load sharing characteristics become worse with the increase of multi-coupling error, in which the eccentric error plays a main role. Therefore, the error control should focus on eccentric error.
10 June 2018 in Mathematical Problems in Engineering
High speed and heavy load put forward demanding requirements for the bending strength of spiral bevel gear. Shot peening, as a technological method, can greatly improve the bending strength of gear. During shot peening, a large number of subtle projectiles bombard the tooth surface of spiral bevel gear at an extremely high speed, which makes the latter produce plastic deformation and strengthened layer. Serving as the bombarded target, spiral bevel gear inevitably leads to the change of tooth surfaces microstructure. This paper aims at revealing the coupling law between microstructure and lubrication characteristics and establishing a reasonable model that can describe the tooth surface microstructure of shot peened spiral bevel gear. Besides, this paper brings insight into the lubrication characteristics of shot peened spiral bevel gears. Based on the elastohydrodynamic lubrication (EHL) theory, a comparative research on tooth surface lubrication characteristics has been conducted by various microscopic morphologies in this study.
31 October 2018 in Mathematical Problems in Engineering
In this study, the dynamic model for the herringbone planetary gear transmission system is established by the lumped parameter method based on the system dynamics and the Lagrange equation, and the impact of the support stiffness and the torsional stiffness on dynamic characteristics is studied. The research results have a guiding significance for the design of the herringbone gear transmission system. In this model, the herringbone gear is treated as a special gear coupled by 2 opposite helical gears, where the stagger angle, comprehensive meshing error, support stiffness, support damping, and load inertia are considered in the analysis of dynamics. Moreover, the dynamic characteristic of the carrier is considered as well. By calculating the meshing force curve of the transmission system, the impact of the stagger angle, supporting stiffness, and the torsional stiffness on meshing force and load sharing coefficient is analyzed. The results show that the stagger angle has an obvious impact on load sharing coefficient while it has little impact on maximum meshing force. And the support stiffness has a more obvious impact on the dynamic characteristics of the system. The recommendary support stiffness of the system is that all of the support stiffness of the sun gear, planetary gear, ring gear, and carrier is 107 N/m. The torsional stiffness has little impact on the dynamic characteristics of transmission system, except the torsional stiffness of planetary gear, and carrier has an obvious impact on load sharing coefficient. The commercial software ADAMS carried out dynamics analysis of the transmission system to verify the necessity validity of the theoretical analysis.