17 October 2017 in Langmuir
21 August 2009 in Lab on a Chip
A simple sheath flow microfluidic device is used to fabricate polymer micro/nanofibers that have precisely controlled shapes and sizes. Poly(methylmethacrylate) (PMMA) was used as the model polymer for these experiments. The sheath-flow device uses straight diagonal and chevron-shaped grooves integrated in the top and bottom walls of the flow channel to move sheath fluid completely around the polymer stream. Portions of the sheath stream are deflected in such a way as to define the cross-sectional shape of the polymer core. The flow-rate ratio between the sheath and core solution determines the fiber diameter. Round PMMA fibers with a diameter as small as 300 nm and flattened fibers with a submicron thickness are demonstrated.
1 May 2019 in Journal of Rheology
Carbon black suspensions exhibit complex, shear-dependent macroscopic properties that are a consequence of the state of the suspension microstructure. In this work, the shear-induced microstructure...
31 August 2012 in Advanced Functional Materials
29 January 2021 in Journal of Rheology
Scientific questions surrounding the shear-dependent microstructure of carbon black suspensions are motivated by a desire to predict and control complex rheological and electrical properties encountered under shear. In this work, direct structural measurements over a hierarchy of length scales spanning from nanometers to tens of micrometers are used to determine the microstructural origin of the suspension viscosity measured at high shear rates. These experiments were performed on a series of dense suspensions consisting of high-structured carbon blacks from two commercial sources suspended in two Newtonian fluids, propylene carbonate and light mineral oil. The shear-induced microstructure was measured at a range of applied shear rates using Rheo-VSANS (very small angle neutron scattering) and Rheo-USANS (ultra-small angle neutron scattering) techniques. A shear-thinning viscosity is found to arise due to the self-similar break up of micrometer-sized agglomerates with increasing shear intensity. This self-similarity yields a master curve for the shear-dependent agglomerate size when plotted against the Mason number, which compares the shear force acting to break particle-particle bonds to the cohesive force holding bonds together. It is found that the agglomerate size scales as Rg,agg∼Mn−1. Inclusion of the particle stress contribution extends the relevance of the Mason number to concentrated suspensions such as those relevant to the processing of carbon black suspensions for various applications.
17 August 2023 in Frontiers in Physics
The microstructural link to the rheology of carbon black suspensions has recently become clear as a result of advances in computational and experimental methods. This understanding reveals the important role of the restructuring, build-up, and break-up of carbon black agglomerates in simple shear, rationalized by a dimensionless balance of the hydrodynamic forces acting to break the agglomerates apart against the cohesive forces holding them together (i.e., the Mason number). The Mason number not only can predict the origin of reversible thixotropy seen in carbon black suspensions observed at higher shear intensities, but can also be used to rationalize the evolution of microstructure at lower shear intensities. This review focuses on carbon black suspension behavior, but the insights derived from carbon black suspensions are broadly applicable to a diverse class of soft matter including colloidal gels relevant to a variety of applications.